Sharp AR-P450 AR-P350 AR-P450 Operation Manual - Page 26
Loading Paper
View all Sharp AR-P450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
LOADING PAPER The message "ADD PAPER" or "OPEN TRAY Follow the procedure below to load paper. AND ADD PAPER" will appear when paper runs out during operation. NOTES q Do not use curled or folded paper. Doing so may cause a misfeed. q For best results use paper supplied by SHARP. (See page 1-18.) q When you change the paper type and size in paper tray 1, set the paper type and size referring to "Setting the paper size and type" (page 1-19). q Do not place heavy objects or press hard on any tray which is pulled out. Loading paper in paper tray 1 1 Pull out paper tray 1. Gently pull the tray out until it stops. 2 Load paper into the tray. Do not load paper above the maximum height line (approximately 500 sheets of 20 lbs. (80 g/m2) paper). 3 Gently push tray 1 into the machine. Push the tray firmly all the way into the machine. 4 Set the paper type. If you change the paper type, be sure to set the paper type referring to "Setting the paper size and type" (page 1-19). 5 Loading paper in paper tray 1 is now complete. Changing the paper size in paper tray 1 For paper tray 1, 8-1/2" x 11", A4 or B5 size paper can be set. Use the following procedure to change the size as needed. 1 Pull out paper tray 1. 4 Gently push tray 1 into the machine. If paper remains in the tray, remove it. Push the tray firmly all the way into the machine. 2 Adjust the guide plates A and B in the tray to the length and width of the paper. The guide plates A and B are slidable. Adjust them to the paper size to be loaded while squeezing their lock levers. 3 Load paper into the tray. 5 Set the paper size. Be sure to set the paper size and paper type referring to "Setting the paper size and type" (page 1-19). If this is not done, paper misfeeds will occur. 6 Changing paper size in paper tray 1 is now complete. 1-16