Sharp AR-P450 AR-P350 AR-P450 Operation Manual - Page 67
Misfeed removal guidance, MISFEED REMOVAL
View all Sharp AR-P450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 67 highlights
MISFEED REMOVAL When the machine is being operated from the touch panel on a scanner module: When a misfeed has occurred during printing, the message "A MISFEED HAS OCCURRED." will appear in the touch panel display of the operation panel and printing including copying and facsimile output will stop. The approximate misfeed locations are indicated with " " shown in the illustration below. The page numbers for detailed information on misfeed removal are also shown. Misfeed in the scanner module . (See the operation manual for copier operation.) Misfeed in the finisher (page 5-14) Misfeed in the transport area, fusing area, and exit area (page 4-6) Misfeed in the mail-bin stacker (page 5-8) Misfeed in the duplex module (page 4-7) Misfeed in the bypass tray (page 4-7) Misfeed in paper tray 1 (page 4-4) Misfeed in the saddle stitch finisher (page 5-24) Misfeed in the multi purpose drawer (page 4-5) Misfeed in the multi purpose drawer (page 4-5) Misfeed in the stand/MPD & 2000 sheet paper drawer (page 4-5) 4 Misfeed in the stand/3 x 500 sheet paper drawer (page 4-5) NOTES q Facsimile reception data is always temporarily stored in memory. After misfed paper is removed, any received data in memory will be automatically printed. q If the machine is performing a scanning operation, vibrations resulting from hard operation of machine covers or trays during misfeed removal will cause uneven scanning. Also if a hard disk drive unit is installed, it may malfunction due to vibration. NOTES q Do not damage or touch the photoconductive drum. (See pages 1-5 and 4-6.) q Be careful not to tear the misfed paper during removal. q If paper is accidentally torn during removal, be sure to remove all pieces. CAUTION The fusing unit is hot. Take care in removing paper. Misfeed removal guidance Fusing unit Misfeed removal guidance can be displayed by touching the INFORMATION key on the touch panel after a misfeed has occurred. INFORMATION 4-3