Sharp AR-P450 AR-P350 AR-P450 Operation Manual - Page 90
Misfeed in the finisher, FINISHER
View all Sharp AR-P450 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
FINISHER Misfeed in the finisher When a misfeed occurs in the finisher, remove the misfed paper following the procedure below. 1 Remove the misfed paper from the output area. Be careful not to tear the misfed paper during removal. 5 Raise the paper guide and remove the misfed paper. Paper guide Do not remove paper from the stapler compiler. 2 Open the finisher top cover. Top cover Move the tab in the direction of the arrow as shown in the illustration to open the top cover. 6 Close the finisher compiler. 3 Remove the misfed paper. Be careful not to tear the misfed paper during removal. After removing the paper, press down on the top cover to close it. 4 Open the finisher compiler. Release the latch to open the finisher compiler. 5-14
5-14
Misfeed in the finisher
When a misfeed occurs in the finisher, remove the misfed paper following the procedure below.
1
Remove the misfed paper from the output
area.
Be careful not to tear the
misfed paper during
removal.
2
Open the finisher top cover.
Top cover
Move the tab in the
direction of the arrow as
shown in the illustration to
open the top cover.
3
Remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
After removing the paper,
press down on the top
cover to close it.
4
Open the finisher compiler.
Release the latch to open
the finisher compiler.
5
Raise the paper guide and remove the
misfed paper.
Paper
guide
Do not remove paper from
the stapler compiler.
6
Close the finisher compiler.
FINISHER