Sharp AR-P450 AR-P350 AR-P450 Operation Manual - Page 95

SADDLE STITCH FINISHER s Staple sort mode Collated sets of prints or copies will be stapled and delivered to the offset tray. When saddle stitching is selected, the prints or copies will be stapled at the center and delivered to the saddle stitch tray. The stapling positions, orientation, paper size for stapling, and stapling capacity are shown below. Stapling positions Top left corner of printouts Center left two positions of printouts Portrait orientation Available paper sizes: 8-1/2" x 11", A4 and B5 Stapling capacity: Up to 50 sheets for any sizes Same as above Landscape orientation Available paper sizes: 11" x 17", 8-1/2" x 14", 8-1/2" x 13", 8-1/2" x 11" R, A3, B4, A4R, and B5R Stapling capacity: Up to 50 sheets for 8-1/2" x 11"R, A4R and B5R, and up to 25 sheets for other sizes Same as above Lower left corner of printouts Same as above Same as above Saddle stitch on centerfold line. Paper in the portrait direction cannot be saddle stitched. Available paper sizes: 11" x 17", 8-1/2" x 11"R, A3, B4, and A4R Stapling capacity: Up to 10 sheets for any sizes 5 s Saddle stitch function The saddle stitch finisher can automatically place two staples for centerline binding of prints or copies and fold them along the centerline. s Hole punching (only if a punch module is installed) If the saddle stitch finisher is equipped with a hole punch module, printed paper can be hole punched and delivered to the offset tray. Saddle stitching and hole punching cannot be selected at the same time. The automatic image rotation will not function when the hole punching function is used. Two or three holes can be punched depending on the paper size. (See paper sizes for hole punching on page 5-18.) {Original 1} {Punch positions} {Original 2} {Punch positions} 5-19