Sharp MX-C301W Operation Guide - Page 125

Original Size Input 2 COPIER (1), (2) (3) OK Cancel OK X 11 (1~14) inch Y 8 1/2 (1~8 1/2) inch Enter the original size. (1) Enter the X (horizontal) dimension of the original. With the [X] key highlighted, enter the X (horizontal) dimension of the original with the keys. When the document glass is used, a number from 1" to 11" (25 mm to 297 mm) can be entered. When the automatic document feeder is used, a number from 5-1/2" to 14" (140 mm to 356 mm) can be entered. If the horizontal dimension of the original is less than 5-1/2" (140 mm), use the document glass. (2) Enter the Y (vertical) dimension of the original. Touch the [Y] key and enter the Y (vertical) dimension of the original with the keys. When the document glass is used, a number from 1" to 8-1/2" (25 mm to 216 mm) can be entered. When the automatic document feeder is used, a number from 5-1/2" to 8-1/2" (140 mm to 216 mm) can be entered. If the vertical dimension of the original is less than 5-1/2" (140 mm), use the document glass. (3) Touch the [OK] key. You will return to the base screen. Make sure that the entered dimensions appear in the [Original] key. STORING FREQUENTLY USED ORIGINAL SIZES You can save special original sizes that you frequently use. This section explains how to store, retrieve, change, and delete special original sizes. Storing original sizes (editing/clearing) Up to 12 special original sizes can be stored. Touch the [Original] key in the base screen of copy mode and then follow the steps below. Touch the [Custom Size] key. Original OK 1 8½x14 8½x11 Size Input 8½x13 5½x8½ 

8½x13 Custom Size AB Inch 2-29 Contents