Sharp MX-C301W Operation Guide - Page 491

SCANNER/INTERNET FAX 4 (1) (2) Scan/Special Modes OK Program Job Build Card Shot File Erase Mixed Size Original Business Card Scan Quick File Timer Blank Page Skip Original Count Suppress Background Select job build mode. (1) Touch the [Job Build] key so that it is highlighted. (2) Touch the [OK] key. Press the [COLOR START] key or the [BLACK & WHITE START] key to scan the first set of originals. 5 If the destination is an Internet fax destination, press the [BLACK & WHITE START] key. To cancel scanning... Press the [STOP] key ( ) to cancel the operation. Insert the next set of originals and press the [COLOR START] key or the [BLACK & WHITE START] key. Press the [START] key pressed in step 5. 6 Repeat until all originals have been scanned. To cancel scanning... Press the [STOP] key ( ) to cancel the operation. All scanned data will be cleared. Place next original. (Pg.No.x) Press [Start]. When finished, press [Read-End]. Touch the [Read-End] key. Configure Read-End 7 • If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the transmission is reserved. • The [Configure] key can be touched to change the exposure, resolution, scan size, and send size for each original page scanned. If the memory becomes full during scanning, a message will appear and the transmission will be canceled. To cancel the job build function.... Touch the [Job Build] key in the screen of step 4 so that it is not highlighted. 5-80 Contents