Sharp MX-C301W Operation Guide - Page 743

TROUBLESHOOTING Problem Paper does not feed from the paper tray. The image on paper is skewed. The automatic document feeder does not operate. Point to check Is the paper loaded correctly in the paper tray? In the Paper Tray Settings of the system settings, are restrictions placed on the trays that can be used in each mode (copy, print, fax, Internet fax, and document filing)? Is too much paper loaded in the bypass tray? Are the bypass tray guides adjusted to the width of the paper? Are the original guides adjusted to the width of the paper? Have functions been disabled by the administrator? Solution Set the guides to the size of the paper. Make sure the height of the paper does not exceed the indicator line. Check the Paper Tray Settings and see if checkmarks appear in the checkboxes of each mode (Feeding Approved Job). Functions without a checkmark cannot be used for printing using that tray. ➞ System Settings > "Paper Tray Settings" > "Tray Settings" > "Change" > (Each mode) Do not load more than the maximum number of sheets. The maximum number of sheets varies depending on the paper type setting. For more information, see "SPECIFICATIONS" in the Quick Start Guide. Adjust the bypass tray guides to the width of the paper. Adjust the original guides to the width of the paper. Check with your administrator. Some functions may have been disabled in the system settings (administrator). 8-38 Contents