Sharp MX-C301W Operation Guide - Page 662
Connection Type Switching, Wireless Settings
View all Sharp MX-C301W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 662 highlights
SYSTEM SETTINGS Connection Type Switching Specify the network connection type (wired or wireless). For wireless communication via an access point, select "Wireless (Infrastructure Mode)". (A wired connection already being established at this time will be disabled.) For wireless communication between devices without using an access point, select "Wired + Wireless (Access Point Mode)". For wired connection only (without any wireless communication), select "Wired Only". • If "Wired + Wireless (Access Point Mode)" is selected, only the following functions and operations are available for devices connected to the machine: - Browsing Web pages of the machine - Printer functions - Scanner functions - Remote operations ("REMOTE OPERATION OF THE MACHINE" (Page 1-22)) - SMB server functions - mDNS • This function is not available in some countries and regions. Wireless Settings Configure settings to connect the network using a wireless connection. • [Configure (Access Point Mode)] key If the [Settings] button is touched while [Connection Type Switching] is set to [Wired+Wireless (Access Point Mode)] or [Wired Only], the Wireless Settings (Access Point Mode) screen is displayed. • [Configure (Infrastructure Mode)] key If [Connection Type Switching] is set to [Wireless (infrastructure mode)] and the [Settings] button is touched, the infrastructure mode wireless setting screen is displayed. • [Initialize] key Touch this key to reset wireless settings to the factory default. Configure (Access Point Mode) SSID Enter an SSID using up to 32 characters. Security Type Select a security type. Encry. Select an encryption type. Security Key Enter a security key. 5 characters or 10-digit hexadecimal number Show Security Key If it is set to ON, the security key appears. Device IP Address Enter the IP address. Channel to Be Used Select the channel to be used in wireless LAN. Bandwidth Set the frequency band that is used for wireless LAN. Sending Output Configure the sending output. IP Address Distribution Range Setting Configure the range to be used the IP address and the lease period for the IP address. 7-75 Contents