Sharp MX-C301W Operation Guide - Page 45

INTERIOR (13) BEFORE USING THE MACHINE (14) (15) (16) (17) (18) (19) (20) (13) Toner cartridges These contain toner for printing. When the toner runs out in a cartridge, the cartridge of the color that ran out must be replaced. ☞ REPLACING THE TONER CARTRIDGES (page 1-49) (14) Fusing unit paper guide Open to remove misfed paper. (15) Fusing unit release levers Push down these levers to release the pressure when removing misfed paper from inside the fusing area or when feeding an envelope from the bypass tray. Caution • The fusing unit is hot. Do not touch the fusing unit when removing misfed paper. Doing so may cause a burn or injury. • When pushing down the levers, pinch the levers with your thumb and index finger while pushing down slowly. If you push the levers strongly, the levers may hit your fingers. (16) Toner collection container This collects excess toner that remains after printing. ☞ REPLACING THE TONER COLLECTION CONTAINER (page 1-52) Your service technician will collect the toner collection container. (17) Right cover of paper feed unit (when a paper feed unit is installed) Open this to remove a paper misfeed in tray 2. (18) Side cover Open this cover to remove a misfeed. (19) Roller rotating knob Rotate to remove misfed paper. (20) Duplex conveyor cover Open this cover to remove a misfeed. Do not block the exhaust slots of the machine by placing something in front of them or placing the machine close to the wall. 1-4 Contents