Sharp MX-C301W Operation Guide - Page 446
Sending An Image In Usb Memory Mode
![]() |
View all Sharp MX-C301W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 446 highlights
SCANNER/INTERNET FAX SENDING AN IMAGE IN USB MEMORY MODE Follow the steps below to send a scanned image to a commercially available USB memory device that has been connected to the machine. This stores the file in the USB device. • Use a FAT32 USB memory with a capacity of no more than 32 GB. • When a default address is configured in "Default Address Setting" in the system settings (administrator), the mode cannot be changed. To switch to USB memory mode, touch the [Cancel] key in the touch panel and then follow the steps below. Connect the USB memory to the USB connector (Type A) on the machine. 1 Place the original. • When placing the originals, orient them as shown below. Originals Document feeder tray Place the original face up. Document glass Place the original face down and align the corner with the tip of the arrow mark in the top left corner of the document glass scale. Portrait orientation* 2 1 1 1 Landscape orientation 1 1 1 * To place a large portrait-oriented original, place it as shown above in "Landscape orientation" and specify the placement orientation in step 4. • Originals cannot be scanned in succession from both the automatic document feeder and the document glass and sent in a single transmission. 5-35 Contents
![](/manual_guide/products/sharp-mxc301w-operation-guide-b72c5de/446.png)