Sharp MX-C301W Operation Guide - Page 312
Transmittable Original Sizes, When The Line Is Busy, When A Communication Error Occurs
![]() |
View all Sharp MX-C301W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 312 highlights
FACSIMILE TRANSMITTABLE ORIGINAL SIZES The following original sizes can be transmitted. Minimum original size Maximum original size Using the automatic document feeder Using the document glass 5-1/2" (height) x 5-1/2" (width) (140 mm (height) x 140 mm (width)) - 8-1/2" (height) x 19-5/5"* (width) (216 mm (height) x 500 mm* (width)) 8-1/2" (height) x 11" (width) (216 mm (height) x 297 mm (width)) *A long original can be transmitted. *Long originals Depending on the resolution setting and the width of the original, there may not be sufficient space in memory to hold a long original. When a long original cannot be entirely scanned, use direct transmission or manual transmission (on-hook dialing). WHEN THE LINE IS BUSY If the line is busy when you send a fax, transmission will be re-attempted automatically after a preset interval. This function only operates in memory transmission mode. In direct transmission mode or manual transmission mode, the transmission will be canceled. Wait briefly and then try sending the fax again. To cancel transmission... Cancel the transmission from the job status screen. ☞ CANCELING A FAX IN PROGRESS OR A RESERVED FAX (page 4-123) System Settings (Administrator): Recall in Case of Line Busy This is used to set the number of recall attempts and the interval between attempts when the connection cannot be established because the line is busy. The factory default setting is 2 attempts at an interval of 3 minutes. WHEN A COMMUNICATION ERROR OCCURS If a communication error occurs or the other fax machine does not answer the call within a preset period of time, transmission will be re-attempted automatically after a preset interval. This function only operates in memory transmission mode. To cancel transmission... Cancel the transmission from the job status screen. ☞ CANCELING A FAX IN PROGRESS OR A RESERVED FAX (page 4-123) System Settings (Administrator): Recall in Case of Communication Error This is used to set the number of recall attempts and the interval between attempts when a transmission fails due to an error. The factory default setting is attempt at an interval of 3 minutes. 4-27 Contents
![](/manual_guide/products/sharp-mxc301w-operation-guide-b72c5de/312.png)