Sharp MX-C301W Operation Guide - Page 132

COPIER (1) (2) Paper Select OK 7 Paper Tray 1. 8½x11 Plain 2. 8½x11R Plain Bypass Tray 8½x11 Plain Select the bypass tray. (1) Touch the paper size key of the bypass tray. (2) Touch the [OK] key. Press the [COLOR START] key or the [BLACK & WHITE START] key. Scanning begins. • If the originals were placed in the document feeder tray, the originals are copied. • If you placed the originals on the document glass, scan each page one page at a time. 8 When using sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then press the [Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first original. To cancel scanning of the original and copying... Press the [STOP] key ( ). Enter the paper size of the bypass tray When the [Custom Size] key is touched, the paper size entry screen appears. Bypass Tray Type/Size Setting Size Input X11 Y8½ X11 Y8½ X11 Y8½ X 17 (5 1/2~14) inch Y 11 (3 5/8~8 1/2) inch OK OK AB Inch Touch the [X] key and enter the horizontal dimension of the paper with the keys, and then touch the [Y] key and enter the vertical dimension. When finished, touch the [OK] key. Stored custom paper sizes appear in the keys on the left side of the screen. Custom paper sizes are stored in the system settings. For details, see "Paper Tray Settings" (page 7-13) in "7. SYSTEM SETTINGS". If the key for the size that you wish to enter appears, touch that key. 2-36 Contents