Sharp MX-C301W Operation Guide - Page 741

TROUBLESHOOTING Problem Printing is not possible or stops during a job. Point to check Is a tray out of paper? Is the machine out of toner? Has a paper misfeed occurred? Is the output tray full? Is the toner collection container full? In the Paper Tray Settings of the system settings, are restrictions placed on the trays that can be used in each mode (copy, print, fax, Internet fax, and document filing)? Solution Add paper as instructed by the message in the touch panel. Replace the toner cartridge. When toner runs low, a message will appear to inform you that the toner cartridge must be replaced. To replace the toner cartridge, see "MAINTENANCE" (page 1-44) in "1. BEFORE USING THE MACHINE". Remove the misfeed as instructed by the message in the touch panel. ☞ REMOVING MISFEEDS (page 8-9) Remove the output from the tray and resume printing. When the output tray becomes full, a detector activates and stops printing. Replace the toner collection container as instructed by the message in the touch panel. ☞ 1. BEFORE USING THE MACHINE "MAINTENANCE" (page 1-44) Check the Paper Tray Settings and see if checkmarks appear in the checkboxes of each mode (Feeding Approved Job). Functions without a checkmark cannot be used for printing using that tray. ➞ System Settings > "Paper Tray Settings" > "Tray Settings" > "Change" > (Each mode) PROBLEMS RELATED TO PAPER FEEDING AND OUTPUT Problem The original misfeeds (automatic document feeder). Point to check Is too much paper loaded in document feeder tray? Is the original a long original? Is the original on thin paper? Is the feed roller dirty? Solution Make sure that the stack of paper in the tray is not higher than the indicator line. When using the automatic document feeder to scan a long original, set the scan size to [Long Size]. (Note that long originals cannot be copied using the copy function.) Use the document glass to scan the original. Clean the surface of the original feed roller. ☞ 1. BEFORE USING THE MACHINE "MAINTENANCE" (page 1-44) 8-36 Contents