Sharp MX-C301W Operation Guide - Page 363
Insert the next set of originals and press the [BLACK & WHITE START] key.
![]() |
View all Sharp MX-C301W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 363 highlights
FACSIMILE Press the [BLACK & WHITE START] key to scan the first set. 4 To cancel scanning... Press the [STOP] key ( ). Insert the next set of originals and press the [BLACK & WHITE START] key. Repeat this step until all originals have been scanned. 5 To cancel scanning... Press the [STOP] key ( ). All scanned data will be cleared. Place next original. (Pg.No.x) Press [Start]. When finished, press [Read-End]. Touch the [Read-End] key. Configure Read-End 6 • If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the transmission is reserved. • The [Configure] key can be touched to change the exposure, resolution, scan size, and send size for each original page scanned. • If the memory becomes full during scanning, a message will appear and the transmission will be canceled. • This function cannot be used in direct transmission mode or when the speaker is used to dial. To cancel Job Build.... Touch the [Job Build] key in the screen of step 3 so that it is not highlighted. 4-78 Contents
![](/manual_guide/products/sharp-mxc301w-operation-guide-b72c5de/363.png)