Sharp MX-C301W Operation Guide - Page 658
Setting a Maximum Number of Copies
![]() |
View all Sharp MX-C301W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 658 highlights
Other Settings SYSTEM SETTINGS Copy Exposure Adjustment This is used to adjust the exposure level when [Auto] is used for the copy exposure. Color Use this to set the copy exposure level in color mode for the document glass and for the automatic document feeder. Black & White Use this to set the copy exposure level in black & white mode for the document glass and for the automatic document feeder. Add or Change Extra Preset Ratios Two enlargement preset ratios (101% to 400%) and two reduction preset ratios (25% to 99%) can be added. An added preset ratio can also be changed. Preset ratios other than added preset ratios cannot be changed. Card Shot Settings This is used to set the default original size for the card shot function. Both the X (horizontal) and Y (vertical) dimensions of the original can be set from 1" (25 mm) to 8-1/2" (210 mm) in increments of 1/8" (1 mm). Fit to Page Enable this setting to have the [Fit to Page] key always appear in the card shot screen. ID Card Copy Setting When using ID card copy, you can change the layout setting of the ID card copy. For the layout patterns, see the illustrations on page 2-58. Setting a Maximum Number of Copies This is used to set the maximum number that can be entered for the number of copies (number of continuous copies). Any number from 1 to 999 can be specified. Initial Margin Shift Setting This is used to set the default margin shift amount. Specify a value from 0" (0 mm) to 1" (20 mm) in increments of 1/8" (1 mm) for both the front and reverse sides. Erase Width Adjustment This is used to set the default erase width for erase copy. Specify a value from 0" (0 mm) to 1" (20 mm) in increments of 1/8" (1 mm) for edge erase. 7-71 Contents
![](/manual_guide/products/sharp-mxc301w-operation-guide-b72c5de/658.png)