Sharp MX-C301W Operation Guide - Page 341

FACSIMILE FAX RECEPTION This section explains the basic procedures for receiving faxes. RECEIVING FAXES When the reception mode is set to "Auto Reception", the machine will receive and print faxes automatically. The fax reception mode is displayed in the base screen. Scan Internet Fax Fax USB Mem. Scan PC Scan Address Book Original Scan: A8u½txo11 Send: Auto Direct TX Exposure Auto Sub Address Resolution Standard Address Review Special Modes File Quick File Preview Auto Reception Fax Memory:100% This shows the current fax reception mode and the amount of free memory remaining. • When fax reception is in progress, it is possible to reserve a transmission by performing the transmission in memory transmission mode. ☞TRANSMISSION METHODS (page 4-25) • To print received faxes, make sure that the required paper is loaded in the machine's paper trays. Differences in orientation are automatically adjusted when faxes are received. When a fax smaller than 8-1/2" x 11" (A4) size is received, the size of the paper used for printing will vary depending on the orientation (vertical or horizontal) in which the sender placed the original. • Recieved data cannot be printed while the transmission original being scanned. It will be printed automatically after the scanning is finished. • System Settings: Receive Setting (page 7-108) This is used to change the fax reception mode. "Auto Reception" should normally be used. Select "Manual Reception" when an extension phone is connected to the machine. • System Settings (Administrator): Allow/Reject Number Setting You can store numbers and specify whether or not reception is allowed from those numbers. 4-56 Contents