Sharp PN-V701 PN-V701 Operation Manual - Page 32

Menu Items nOTHERS SCREEN MOTION PATTERN Residual images are reduced by moving the screen. OFF SCREEN MOTION function is disabled. PATTERN1.......The whole screen moves vertically and horizontally. PATTERN2.......A black screen spreads from the bottom of the screen and then shrinks to the bottom of the screen. If the monitor is installed in the portrait orientation, a black screen spreads from the left end of the screen and then shrinks to the left end of the screen. PATTERN3.......A black bar moves from the left end to the right end of the screen. If the monitor is installed in the portrait orientation, a black bar moves from the top to the bottom of the screen. PATTERN4.......Black screens appear from both sides of the screen, and the displayed image is compressed into the central field. If the monitor is installed in the portrait orientation, the screen is compressed from the top and bottom ends. PATTERN1 PATTERN2 PATTERN3 PATTERN4 MOTION TIME 1 Specify a time period (operating interval) until SCREEN MOTION starts. MOTION TIME 2 Specify a time period during which SCREEN MOTION operates (time period during which the screen will move). POWER MANAGEMENT POWER MANAGEMENT determines whether or not to switch modes from no signal to the input signal waiting mode. CONNECT AUTO INPUT SELECT Sets whether the input into the input terminal automatically changes when a video signal is input into that terminal. The input via the expansion slot is ignored. (With some input signals, the input may not change.) NO SIGNAL AUTO INPUT SEL. Specify whether to change inputs automatically. When ON is selected and no signal is present in the selected input mode, the monitor automatically changes the selected mode to another mode where a video signal is present. When there are video signals in multiple input modes, switching takes place according to the order of priority set in AUTO INPUT SELECT PRIORITY. AUTO INPUT SELECT PRIORITY Sets the order of input terminal priority for NO SIGNAL AUTO INPUT SEL.. When an option that supports this function is connected to the expansion slot, you can set the order in OPTION. (If the option does not support this function, "OPTION" will not appear.) Input does not change automatically for terminals without a priority setting. LOGO SCREEN Sets whether or not to display the logo screen. SCAN MODE (HDMI1 / HDMI2 / D-SUB[COMPONENT] / OPTION) Sets the scan mode used for video input. MODE1 Over-scan display MODE2 Under-scan display MODE3 Under-scan display when the input signal is 1080i/p. Otherwise, over-scan display * E ven when MODE1 is selected, under-scan display is used when the input signal is 1080i/p and the screen size is Dot by Dot. VOLUME Adjusts the volume. MUTE AUDIO Can temporarily turn off the volume. INFORMATION Displays monitor information. (See page 21.) E 32