Sharp PN-V701 PN-V701 Operation Manual - Page 42
RS-232C command table, Power control/Input mode selection
View all Sharp PN-V701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Controlling the Monitor with a computer (RS-232C) RS-232C command table How to read the command table Command: Direction: Parameter: Reply: * : Command field (See page 38.) W When the "Parameter" is set in the parameter field (see page 38), the command functions as described under "Control/Response Contents". R The returned value indicated under "Reply" can be obtained by setting "????", " ?" or "???+" (repeater control) in the parameter field. (See page 38.) Parameter field (See page 38.) Response (Returned value) When POWER SAVE MODE is set to OFF: Indicates a command which can be used in standby mode or when the power is on. "-" : Indicates a command which can be used when the power is on. Cannot be used in standby mode. When POWER SAVE MODE is set to ON: "●" : Indicates a command which can be used in standby mode or when the power is on. "○/-" : Indicates a command which can be used when the power is on. Cannot be used in standby mode. Power control/Input mode selection Function POWER CONTROL INPUT MODE SELECTION Command Direction Parameter Reply Control/Response contents * POWR W 0 Switches to standby mode. 1 Returns from standby mode. R 0 Standby mode 1 Normal mode 2 Input signal waiting mode INPS W 0 Toggle change for input mode. Terminals not selected in INPUT SELECT cannot be selected. 1 DVI-D 2 D-SUB[RGB] "ERR" when other than RGB is selected for D-SUB of INPUT SELECT. 3 D-SUB[COMPONENT] "ERR" when other than COMPONENT is selected for D-SUB of INPUT SELECT. ● 10 HDMI1 13 HDMI2 14 DisplayPort 21 OPTION "ERR" when nothing is attached in the expansion slot. R 1 DVI-D 2 D-SUB[RGB] 3 D-SUB[COMPONENT] 10 HDMI1 13 HDMI2 14 DisplayPort 21 OPTION E 42