Sharp PN-V701 PN-V701 Operation Manual - Page 50
Initialization/Functional Restriction Setting FUNCTION menu
View all Sharp PN-V701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Controlling the Monitor with a computer (RS-232C) Initialization/Functional Restriction Setting (FUNCTION) menu Function Command Direction Parameter Reply Control/Response contents * ALL RESET RSET W 0-1 0: ALL RESET 1, 1: ALL RESET 2 - ADJUSTMENT LOCK ALCK WR 0-2 0-2 0: OFF, 1:ON1, 2:ON2 ● ADJUSTMENT LOCK TARGET ALTG WR 0-2 0-2 0: REMOTE CONTROL, 1: MONITOR BUTTONS, 2: BOTH OSD DISPLAY LOSD WR 0-2 0-2 0: ON1, 1: OFF, 2: ON2 LED OFLD WR 0-1 0-1 0: ON, 1: OFF TEMPERATURE ALERT TALT WR 0-2 0-2 0: OFF, 1: OSD & LED, 2: LED STATUS ALERT SALT WR 0-2 0-2 0: OFF, 1: OSD & LED, 2: LED ○ POWER BUTTON PBTN WR 0-1 0-1 0: MONITOR, 1: EXT. CONTROLLER EXTERNAL CONTROLLER INPUT PCIP WR 0-4 0-4 0: D-SUB, 1: DisplayPort, 2: HDMI1, 3: HDMI2, 4: DVI-D ("ERR" when MONITOR is selected for POWER BUTTON.) SIGNAL RESPONSE LEVEL HDUC WR 1-200 1-200 Others Function TEMPERATURE SENSOR Command Direction DSTA R Parameter Temperature acquisition ERRT R CAUSE OF LAST STANDBY MODE STCA W 0 R Reply Control/Response contents * 0 Internal temperature normal 1 Internal temperature abnormal has occurred and the monitor is in standby mode 2 Internal temperature abnormal occurred (To delete the information of temperature abnormal, turn off the main power.) ● 3 Internal temperature abnormal has occurred and backlight brightness is dimmed 4 Temperature sensor abnormal Value Returns the temperature at the temperature sensors. Indicates a temperature sensor abnormality when "126" is returned. ○ Initialization 0 No detectable error has occurred 1 Standby mode by POWER button 2 Main power off by the main power switch 3 Standby mode by RS-232C or LAN 4 Input signal waiting mode by No Signal ● 6 Standby mode by abnormal temperature 8 Standby mode by SCHEDULE setting 9 Standby mode by DDC/CI 10 Standby mode by HDMI CEC 20 Standby mode by OFF IF NO OPERATION setting Commands for setting of the GAMMA user data Function Command Direction Parameter Reply Control/Response contents * RED GAMMA DATA TRANSFER UGRW W aaxxxx ··· xxxxcc aa: Block number GREEN GAMMA DATA TRANSFER BLUE GAMMA DATA TRANSFER UGGW W UGBW W (xxxx: 32 pieces) aa: 01-16 xxxx: 0000-1023 xxxx: 32 pieces of user data cc: Checksum (ASCII data) of the block number and user data cc: 00-FF RED GAMMA DATA READ UGRR W 1-16 xxxx ··· xxxx xxxx: User data of 32 pieces ○ GREEN GAMMA DATA READ BLUE GAMMA DATA READ UGGR W UGBR W 1-16 (xxxx: 32 pieces) 1-16 xxxx: 0000-1023 USER DATA INITIALIZE UGRS W 0 Initialize the user data. USER DATA SAVE UGSV W 0 Save the user data in the monitor. E 50