Sharp PN-V701 PN-V701 Operation Manual - Page 46
Function, Command, Direction, Parameter, Reply, Control/Response contents
View all Sharp PN-V701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Controlling the Monitor with a computer (RS-232C) Function DisplayPort SETTING HIGH-FREQUENCY GAIN LOW-FREQUENCY GAIN FILTER SETTING OFFSET RESET AUDIO SELECT HDMI1 HDMI2 DisplayPort OPTION Command Direction DPHG WR DPLG WR DPFL WR DPOF WR DPRS W ASHP WR AH2P WR ASDI WR ASOP WR AUDIO OUTPUT START INPUT MODE AOUT WR SUIM WR COMMUNICATION SETTING RS-232C/LAN SELECT CTLS WR BAUD RATE BAUD WR Crestron Connected CRCN WR ID SETTING ID No.SET IDST W R ID NO. SETTING IDSL W (ONCE) ID NO. SETTING IDLK W (SUBSEQUENT) REMOTE No. COPY SETTING VALUE ID CHECK ID DISPLAY COPY TO ID No. COPY SETTING VALUE TARGET IDCK W IDDP W RCNO WR CPMD WR CPTG WR Parameter Reply Control/Response contents * 0-31 0-31 0-31 0-15 0-15 1 0-1 0-1 1, 3 0-1 0-1 1-4, 6-7, 10 0-1 0-31 - 0-15 0-15 0-1 0: HDMI, 1: AUDIO 0-1 0: HDMI, 1: AUDIO 1, 3 1: AUDIO, 3: DisplayPort 0-1 0: OPTION, 1: AUDIO (valid when you have used the expansion slot to expand the functions) ○ 0-1 0: VARIABLE, 1: FIXED 1-4, 6-7, 10 1: LAST INPUT MODE, 2: DisplayPort, 3: HDMI1, 4: HDMI2, 6: DVI-D, 7: D-SUB, 10: OPTION (valid when you have used the expansion slot to expand the functions) 0-1 0: RS-232C, 1: LAN ● 0-2 0-2 0: 9600bps, 1: 19200bps, 2: 38400bps 0-1 0-1 0: OFF, 1: ON 0-255 Sets the monitor's ID number. ("0" means "no ID number".) 0-255 Returns the monitor's ID number. 1-255 0 Set a monitor's ID number to send a command. This ID number is only effective for the command immediately after this command. Clears the ID number if one has been designated. ○ 1-255 Set a monitor's ID number to send a command. This ID number is effective for the next and all subsequent commands after this command. 0 Clears the ID number if one has been designated. 0 ID : xxx Displays monitor's own ID number and the selected ID number on the screen. IDLK : yyy 0-2 0: OFF, 1: ON, 2: ON (turns OFF after 4 sec.) (The IP address and MAC address are both displayed.) - 0-9 0-9 Sets the number of the remote control. 0 0 Copy to all monitors. 1-255 1-255 Copy to the monitor with the set ID number. ○ 0 0 Copies the PICTURE menu settings. 1 1 Copies all the settings. E 46