Sharp PN-V701 PN-V701 Operation Manual - Page 34

Menu Items nDual screen display You can display two screens simultaneously. Set this function with PIP MODES of PIP/PbyP in the MULTI/ PIP menu. PIP Main screen A sub screen is displayed inside a main screen. Sub screen PbyP Main screen Sub screen A main screen and a sub screen are displayed in a line. nEnlarge • You can align several monitors and integrate them into a single large screen to display. • Up to 5 monitors can be aligned in both the horizontal and vertical directions. • Each monitor displays enlarged views of separated images. (Example) Horizontal direction: 2 monitors Vertical direction: 2 monitors PbyP2 Main screen Sub screen Displays a main screen which measures 1280 pixels in the longest direction and a sub screen in a line. * The currently selected input signal is displayed on the main screen. * The following combinations are available for display: DisplayPort - DVI-D DisplayPort - HDMI1 or HDMI2 DisplayPort - D-SUB[RGB] DisplayPort - D-SUB[COMPONENT] DisplayPort - OPTION DVI-D - D-SUB[RGB] DVI-D - D-SUB[COMPONENT] HDMI1 or HDMI2 - D-SUB[RGB] HDMI1 or HDMI2 - D-SUB[COMPONENT] D-SUB[RGB] or D-SUB[COMPONENT] - OPTION TIPS • You might infringe on a copyright of the author which is protected by copyright law when you display the images of the computer screen and television/VCR simultaneously for profit-making or to show the image to the public. • The screen size for dual-screen display is the same as the screen size for single-screen display. The Dot by Dot screen is displayed in NORMAL size except when it is set as the PIP main screen. • When dual-screen display is selected, the SCREEN MOTION function is disabled. • When dual-screen display is selected, the CONNECT AUTO INPUT SELECT function and NO SIGNAL AUTO INPUT SEL. function are disabled. • When dual-screen display is selected, the screen cannot be enlarged. • When dual-screen display is selected, D-SUB of the INPUT SELECT options cannot be set. • When dual-screen display is selected and an interlaced signal (1080i, 480i) is input to the main or sub screen, the image is not displayed properly. • When a signal of 3840×2160 or 4096×2160 is input to the sub screen, the sub screen does not display an image. • In the following cases, you cannot set PIP MODES to PIP, PbyP, or PbyP2. - When DisplayPort STREAM is set to MST. - When ROTATE 180° is set to ON. - When PICTURE FLIP is set to ON. • When HDMI CEC LINK is set to AUTO, SOUND CHANGE on the PIP/PbyP menu may be changed to MAIN due to the switching of the monitor's input or due to the operation of the HDMI-connected device. Horizontal direction: 3 monitors Vertical direction: 2 monitors Setting procedure Set using MULTI in the MULTI/PIP menu. 1. Set ENLARGE to ON. 2. Select ADVANCED (ENLARGE). 3. Set the number of monitors aligned in the horizontal direction in ENLARGE H. 4. Set the number of monitors aligned in the vertical direction in ENLARGE V. 5. Set the section of the separated image to be displayed on each monitor in ENLARGE-POS. 1) Press the ENTER button. 2) Press the , , or button to select position, then press the MENU button. TIPS • When Enlarge is used, the SCREEN MOTION function is disabled. • When Enlarge is used, the CONNECT AUTO INPUT SELECT function and NO SIGNAL AUTO INPUT SEL. function are disabled. • When Enlarge is used, the HDMI AUTO VIEW function is disabled. E 34