Sharp XG-C435X XG-C435X XG-C465X Operation Manual - Page 53
Helpful Functions Set during Installation (“Options2” menu), Setting a Password
View all Sharp XG-C435X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
Helpful Functions Set during Installation ("Options2" menu) Options2 COMP.1 1 Password 2 Speaker 3 Audio Out 4 PRJ Mode 5 Fan Mode 6 Monitor Out 7 LAN/RS232C 8 RS-232C 9 DHCP Client 0 TCP/IP q MAC Address Disable On FAO Front Normal Enable Enable 9600 bps On XX:XX:XX:XX:XX:XX Projector w All Reset MYPROJECTOR SEL./ADJ. ENTER RETURN END 1 Setting a Password If you do not want others to change the setting for the "Options2" menu, set a password. 1 Select "Password", then press |. • The screen for entering the password is displayed. 2 Press ' or " to set the first digit in "New Password" and then press |. 3 Enter the remaining 3 digits and press ENTER. 4 Enter the same password in "Re- confirm" and press ENTER. Note • Once the password is set, you must enter the password to change the "Options2" menu settings. Menu operation Page 42 Changing the Password 1 Select "Password", then press |. • The screen for entering the password appears. 2 Enter the password in "Old Password" using ', ", | and \, then press ENTER. 3 Enter the password in "New Password" using ', ", | and \, then press ENTER. 4 Enter the same password again in "Reconfirm" using ', ", | and \, then press ENTER. Note • If you do not need the password protection for the "Options2" menu settings anymore, press ENTER without entering a new password in steps 3 and 4. • To cancel the password settings, press RE- TURN. If You Forget Your Password If you forget the password, perform the following procedure to delete it, then set a new password. On the projector, press: . Note • If ENTER is held down for more than 5 seconds, the operation buttons on the projector will be locked. (See page 50.) • You cannot use the buttons on the remote control to delete the password. Useful Features -51