Sony BRC-X400 Operating Instructions - Page 12

Installing batteries in the remote, commander, Required batteries, POSITION buttons

Page 12 highlights

Note The BACK LIGHT button is enabled when MODE (Exposure mode) on the EXPOSURE menu is set to [FULL AUTO] (Full auto), [SHUTTER Pri] (Shutter priority), or [IRIS Pri] (Iris priority).  POSITION buttons Hold down the PRESET button and press button 1 to 6 to store the current camera direction, zoom, focus adjustment and backlight compensation in the memory of the pressed number button. To erase the memory contents, hold down the RESET button and press button 1 to 6. Notes • These buttons do not function when the menu is displayed. • Some memory contents may not be erased even if you use the RESET button. For details on items that can be stored by the PRESET button and erased by the RESET button, see "Preset Items and Image Setting File Items" (page 96).  PAN-TILT RESET button Press this button to reset the pan/tilt position.  ZOOM buttons Use the SLOW button to zoom slowly, and the FAST button to zoom quickly. Press the T (telephoto) side of the button to zoom in, and the W (wide angle) side to zoom out. Installing batteries in the remote commander Required batteries Two R6 (size AA) batteries are required for the remote commander. To avoid the risk of explosion, use R6 (size AA) manganese or alkaline batteries. Note Danger of explosion if the batteries are incorrectly replaced. Replace only with the same or equivalent type recommended by the manufacturer. When you dispose of the batteries, you must obey the laws of your area or country. R6 (size AA) batteries are not supplied. Two R6 (size AA) batteries (commercially available) 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104

12
Note
The BACK LIGHT button is enabled when
MODE (Exposure mode) on the EXPOSURE
menu is set to [FULL AUTO] (Full auto),
[SHUTTER Pri] (Shutter priority), or [IRIS Pri]
(Iris priority).
POSITION buttons
Hold down the PRESET button and press
button 1 to 6 to store the current camera
direction, zoom, focus adjustment and
backlight compensation in the memory of
the pressed number button.
To erase the memory contents, hold down
the RESET button and press button 1 to 6.
Notes
• These buttons do not function when the
menu is displayed.
Some memory contents may not be erased
even if you use the RESET button.
For details on items that can be stored by
the PRESET button and erased by the
RESET button, see “Preset Items and Image
Setting File Items” (page 96).
PAN-TILT RESET button
Press this button to reset the pan/tilt
position.
ZOOM buttons
Use the SLOW button to zoom slowly, and
the FAST button to zoom quickly.
Press the T (telephoto) side of the button to
zoom in, and the W (wide angle) side to
zoom out.
Installing batteries in the remote
commander
Required batteries
Two R6 (size AA) batteries are required for the
remote commander. To avoid the risk of
explosion, use R6 (size AA) manganese or
alkaline batteries.
Note
Danger of explosion if the batteries are
incorrectly replaced. Replace only with the same
or equivalent type recommended by the
manufacturer. When you dispose of the
batteries, you must obey the laws of your area or
country.
R6 (size AA) batteries are not supplied.
Two R6 (size AA) batteries
(commercially available)