Sony BRC-X400 Operating Instructions - Page 18
Notes, CAUTION, after connecting the HDMI cable. Then
![]() |
View all Sony BRC-X400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Ceiling Attach the wire rope. M 3×8 (supplied) Ceiling bracket (A) 5 While pushing up the entire camera, attach it to the ceiling bracket (B) using the 3 screws (M3 × 8) supplied. Ceiling M 3 × 8 (supplied) Lightly tighten screws temporarily in the order indicated in the figure. Afterwards, screw each of them firmly. 6-1 Connect the cables to the terminals at the back of the camera. Lightly tighten screws temporarily in the order indicated in the figure. Afterwards, screw each of them firmly. Ceiling CAUTION Use the supplied screws. Otherwise, you may break the internal parts of the camera. 4 Insert the protrusions raised on the ceiling bracket (A) into the spaces prepared in the ceiling bracket (B), and temporarily attach them by pushing the ceiling bracket (A) to the rear. Ceiling bracket (B) Ceiling Ceiling bracket (A) Notes • Make sure no load is applied to the connectors of the cables. • For measures that prevent the HDMI cable from being pulled out, proceed to "6-2" after connecting the HDMI cable. Then, connect all the other cables. 6-2To prevent the HDMI cable from coming off, mount the HDMI cable fixing plate with the supplied screw (single, M2.6 × 6, black) on the back of the camera, then fix the HDMI cable with a banding band etc. 18
![](/manual_guide/products/sony-brcx400-operating-instructions-79dc215/18.png)