Sony BRC-X400 Operating Instructions - Page 27

Pan/Tilt Operation 1 Press the POWER button. The camera will turn on and perform the pan/tilt reset action automatically. 2 Press an arrow button to pan or tilt the camera. While checking the picture on the screen, press the appropriate arrow button. To move the camera little by little, press the button just for a moment. To move the camera in a wide range, press and hold the button. To move the camera diagonally, press the  or  button while holding down the  or  button. To face the camera back to the front Press the HOME button. If you accidentally move the camera with your hand Press the PAN-TILT RESET button to perform the pan/tilt reset action. When the camera moves in a different direction from what you intended The camera is preset to face toward the right whenever the  button is pressed. You might wish to reverse the direction in which the camera moves, for example, when you change the direction of the camera while checking the picture on the screen. In such cases, press the 2 (REV) button while holding down the L/R DIRECTION SET button. To reset the setting, press the 1 (STD) button while holding down the L/R DIRECTION SET button. Arrow button Movement of the camera Setting While holding down Press While holding down Press Note The above setting changes only the signal emitted from the remote commander, and does not change the setting of the camera itself. Therefore, repeat the setting process for each remote commander if you are using more than one remote commander. If the POWER lamp and NETWORK lamp on the camera flash simultaneously, and "PAN-TILT ERROR!" is displayed on the menu screen If the camera is moved by external shock, or objects or your fingers are caught in the camera, the microcomputer inside the camera may not be able to store the pan/tilt position properly, in which case the motion automatically stops. To reset the pan/tilt position, press the PAN-TILT RESET button or turn off the camera and turn it on again. 27