Sony BRC-X400 Operating Instructions - Page 45
Video Out Menu, H Phase Brc-x400/x401
View all Sony BRC-X400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
• COLOR MATRIX SELECT LEVEL PHASE R-G R-B G-R G-B B-R B-G • DETAIL LEVEL MODE Settings can be adjusted individually after recalling a picture profile. To save settings, save to a preset. Notes • The settings for a picture profile cannot be changed. • To load preferred settings at startup, recall the picture profile and save it in PRESET 1. • A picture profile cannot be set from the Administrator menu on the web browser. VIDEO OUT Menu You can set [COLOR SPACE] from the Administrator menu on a web browser. For details, see "Installation tab" (page 67). HDMI COLOR SPACE (Video out - Color space) Set the color space of HDMI output. H PHASE (BRC-X400/X401) This feature allows you to regulate phase differences between the external sync signal input to the EXT SYNC IN terminal of the camera and the video signal of the camera, when a device which generates the synchronizing signal is connected. The adjustment range is from 0 to 959. The video signal is advanced in the + direction and delayed in the - direction for the external sync signal. 1 STEP time for [H PHASE] is 0.0135 μs. H PHASE This allows you to adjust by 10 STEP increments. Choose a value from [0] to [3] to [95]. H PHASE FINE This allows you to adjust by 1 STEP increment. Choose a value from [0] to [9]. If you increase the value beyond 9, the tens digit automatically increases (+1 to [H PHASE]). If you decrease the value beyond 0, the tens digit automatically decreases (-1 to [H PHASE]). Notes • [H PHASE] regulates phase differences only for SDI OUT. • [H PHASE] is not displayed when the SYSTEM SELECT switch, the [VIDEO FORMAT] setting, or [Format] on the Administrator menu is set to 4K. • [H PHASE] cannot be set from the Administrator menu on the web browser. 45