Sony BRC-X400 Operating Instructions - Page 30
Storing Camera Pan/Tilt and Zoom Operations – PTZ TRACE function (BRC-X400/X401)
View all Sony BRC-X400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
Storing Camera Pan/Tilt and Zoom Operations - PTZ TRACE function (BRC-X400/X401) Up to 16 pan/tilt/zoom operation patterns can be stored for up to 180 seconds. This allows you to perform quick operations using the remote commander, without displaying the menu. In this case, up to 6 patterns can be stored. To perform an operation without displaying the menu, set PRESET MODE in the SYSTEM menu (page 46) to TRACE. To display the menu and perform an operation, see "PTZ TRACE Menu" (page 47). Notes • If using the remote commander, pan/tilt and zoom operations cannot be performed simultaneously. • The menu and camera status are not displayed on the screen. • All records will be erased if the IMG FLIP setting is changed. • All PTZ trace records may be erased if you change the video output format. • Playing a recording will restore CLEAR IMAGE ZOOM and PAN TILT SLOW to their states held during recording. Recording pan/tilt and zoom operations POWER 2, 4 SELECT CAMERA 2 1 FOCUS FAR 3 MANUAL NEAR BACK LIGHT 2, 4 POSITION 1~6 AUTO DATA SCREEN PRESET 3 REV 2 6 STD RESET 1 4 5 PRESET POSITIOPNAN-TILT HOME PARNE-TSIELTT FAST T ZOOM 1, 3 T SLOW W W DIREL/CRTION SET 1 Adjust the operation start position of the camera. 2 Hold down the PRESET button and press any of the POSITION1 to 6 buttons in which you want to store the settings. Recording starts. 3 Perform the pan/tilt and zoom operations you want to record. 4 To stop recording, hold down the PRESET button, and press the POSITION button selected in step 2. Playing pan/tilt and zoom operations 1 Press one of the POSITION1 to 6 buttons. The camera moves the pan/tilt and zoom positions to the playback start position. 2 Press the same POSITION button again. Playback starts. Note Playback stops if a pan, tilt, or zoom operation is performed during playback. Deleting recorded pan/tilt and zoom operations Hold down the RESET button and press the desired POSITION1 to 6 button for which you want to clear the registered recording. 30