Sony DCR-TRV80 Operating Instructions - Page 114
Recording an image from tape as a still image
View all Sony DCR-TRV80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Recording an image from tape as a still image Your camcorder can read moving picture data recorded on a tape and record it as a still image on the "Memory Stick." Image size is automatically set to 640 × 480. Before operation Insert the "Memory Stick" and the recorded tape into your camcorder. The POWER switch should be set to . Operate by touching the panel. (1) Press . The picture recorded on the tape is played back. (2) Keep pressing PHOTO lightly and check the image. The picture from the tape freezes and the CAPTURE indicator appears on the screen. Recording does not start yet. To change the still image, release PHOTO, select a still image again, and then press and hold PHOTO lightly. (3) Press PHOTO deeply. Recording is complete when the bar scroll indicator disappears. The image displayed on the screen when you pressed PHOTO deeply will be recorded on the "Memory Stick." 2 640 FINE 12 CAPTURE 101 1 3 640 FINE 101 114 Sound recorded on the tape You cannot record audio from the tape. Title You cannot record the titles. Recording date/time The date/time when it is recorded on the "Memory Stick" is recorded. Various settings are not recorded. When you press PHOTO on the Remote Commander Your camcorder immediately records the image that is on the screen when you press the button.