Sony HT-G700 Operating Instructions - Page 37
BLUETOOTH, settings, SYSTEM], RESET], Resetting the, UPDATE], Updating the, Items, Function, Notes
View all Sony HT-G700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Items [BT] (BLUETOOTH settings) [POWER] (BLUETOOTH Power) [STANDBY] [AAC CODEC] [SYSTEM] (System settings) [IR REPEATER] [AUTO STANDBY] [VERSION] (Version information) [RESET] [ALL RESET] (Resetting the system) [UPDATE] [START] (Updating the system) [CANCEL] Function You can turn the BLUETOOTH function on or off. • [ON]: Turns the BLUETOOTH function on. • [OFF]: Turns the BLUETOOTH function off. Note When the BLUETOOTH function is set to off, the BLUETOOTH input is skipped while selecting input by pressing INPUT. When the system has pairing information, you can turn the system on and listen to music from a BLUETOOTH device, even when the system is in standby mode, by setting the BLUETOOTH standby mode to on. • [ON]: BLUETOOTH standby mode is enabled. • [OFF]: BLUETOOTH standby mode is disabled. Note While the BLUETOOTH standby mode is on, standby power consumption increases. You can enjoy high-quality sound if AAC is enabled and your device supports AAC. • [ON]: Enables AAC codec. • [OFF]: Disables AAC codec. • [ON]: Remote signals for the TV are sent from the rear of the bar speaker. • [OFF]: Turns off the function. For details, see "When the TV Remote Control does not Work" (page 16). • [ON]: Turns on the auto standby function. When you do not operate the system for about 20 minutes, the system enters standby mode automatically. • [OFF]: Off. The current firmware version information of the system appears in the front panel display. You can reset the system settings to the factory default. For details, see "Resetting the System" (page 45). You can start a software update after connecting the USB memory on which the software update file is stored to the system. When there is a software update available, we will notify you on the following website: https://www.sony.com/am/support Notes • Before updating, make sure that the subwoofer is turned on and connected to the system. • You can update the software of the system by pressing and holding and the BLUETOOTH button on the bar speaker for 7 seconds. Returns to the upper layer [UPDATE]. 37US