Sony HT-G700 Operating Instructions - Page 41
even though the values of the, not the same level as that of the TV
View all Sony HT-G700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
No TV sound is output from the system. Check the type and connection of the HDMI cable or optical digital cable that is connected to the system and the TV (refer to the supplied Startup Guide). Disconnect the cables that are connected between the TV and the system, then connect them firmly again. Disconnect the AC power cords (mains leads) of the TV and the system from the AC outlets (mains), then connect them again. When the system and TV are connected with the HDMI cable only, check the following. - The HDMI jack of the connected TV is labeled with "eARC" or "ARC." - The Control for HDMI function of the TV is set to on. - The eARC or ARC function of the TV is enabled. - [HDMI] - [EARC] is set to [ON] (page 36). - [HDMI] - [CONTROL FOR HDMI] is set to [ON] (page 36). If your TV is not compatible with eARC, set [HDMI] - [EARC] to [OFF] (page 36). If your TV is not compatible with eARC or ARC, connect an optical digital cable (not supplied) (refer to the supplied Startup Guide). If the TV is not compatible with eARC or ARC, TV sound will not be output from the system even if the system is connected to the TV's HDMI IN jack. Press INPUT repeatedly to select the TV input (page 22). Increase the volume on the system or cancel muting. If sound of a cable box/satellite box connected to the TV is not output, connect the device to a HDMI IN jack of the system and switch input of the system to HDMI (refer to the supplied Startup Guide). Depending on the order in which you turn on the TV and system, the system may be muted. If this happens, turn on the TV first, then the system. Set the speakers setting of the TV (BRAVIA) to Audio System. Refer to the operating instructions of your TV regarding how to set the TV. Picture and sound of the device that is connected to the system are not output from the TV when the system is not turned on. Set [HDMI] - [STANDBY THROUGH] to [AUTO] or [ON] (page 36). Turn on the system, and then switch the input for the device playing. The sound is output from both the system and TV. Mute the sound of the system or TV. The output sound of the system is not the same level as that of the TV even though the values of the volume level on the system and TV are set to the same value. If the Control for HDMI function is set to on, the value of the volume level on the system may appear on your TV as the TV volume. The output sound levels of the system and TV differ even though the values of the volume level on the system and TV are set to the same value. The output sound levels of the system and TV differ depending on the sound processing characteristics of each, and it is not a malfunction. The sound is interrupted while watching a TV program or content on a Blu-ray Disc, etc. Check the sound mode setting (page 28). If the sound mode is set to [AUTO SOUND], the sound may be interrupted when the sound mode is changed automatically according to the information of the program that is being played. If you do not want to change the sound mode 41US