Sony HT-G700 Operating Instructions - Page 42
sound of the device connected to, the system is heard.
View all Sony HT-G700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
automatically, set the sound mode to a setting other than [AUTO SOUND]. The TV sound from the system lags behind the image. Set [AUDIO] - [SYNC] to [0ms] if it is set to the range between 40 msec and 120 msec (page 35). A time gap between the sound and picture may occur depending on the sound source. If your TV has a function that delays the image, use it for adjustment. No sound or only a very low-level sound of the device connected to the system is heard. Press + on the remote control and check the volume level (page 11). Press or + on the remote control to cancel the muting function (page 11). Make sure the input source is selected correctly. You should try other input sources by pressing INPUT repeatedly (page 22). Check that all the cables and cords of the system and connected device are firmly inserted. When you play content compatible with copyright protection technology (HDCP), it may not be output from the system. Set [HDMI] - [FORMAT] to [STANDARD] (page 21). The surround effect cannot be obtained. Depending on the input signal and the sound mode setting, surround sound processing may not work effectively. The surround effect may be subtle, depending on the program or disc. To play multi-channel audio, check the digital audio output setting on the device connected to the system. For details, refer to the operating instructions supplied with the connected device. Subwoofer No sound or only a very low-level sound is heard from the subwoofer. Make sure that the power indicator on the subwoofer is lit in green or amber. If the power indicator on the subwoofer does not light, try the following. - Make sure the AC power cord (mains lead) of the subwoofer is connected properly. - Press (power) of the subwoofer to turn on the power. If the power indicator on the subwoofer flashes slowly in green or amber, or lights in red, try the following. - Move the subwoofer to a location near the bar speaker so that the power indicator on the subwoofer lights in green or amber. - Follow the steps in "Connecting the Subwoofer" (page 15). If the power indicator on the subwoofer flashes in red, press (power) of the subwoofer to turn off the power and check whether the ventilation holes of the subwoofer is blocked or not. The subwoofer is designed for playback of bass or low frequency sound. If the input sources contain very little bass sound components (i.e., a TV broadcast), the sound from the subwoofer may be difficult to hear. Play the built-in demonstration music by following the steps below and check that the sound is output from the subwoofer. Press and hold on the bar speaker for 5 seconds. The built-in demonstration music is played. Press again. The built-in demonstration music 42US