Sony J30 Product Manual (J10, J10SDI, J30, and J30SDI Manual) - Page 17

2-1 Control Panel Chapter 2 Location and Function of Parts Tape transport indicator area • Tape transport indicator When you press each button in the tape transport control section, the corresponding indicators light. m: REW (rewind) indicator B: PLAY indicator When AUTO TRACKING (the automatic tape loading function) is in operation, this indicator flashes. M: F FWD (fast forward) indicator x: STOP indicator • JOG/SHTL (jog/shuttle) indicator The "JOG" indicator lights when playback is carried out in jog mode, and the "SHTL" indicator lights when playback is carried out in shuttle mode. • JOG/SHTL (jog/shuttle) transport indicator b: Jog/shuttle reverse indicator (green) B: Jog/shuttle forward indicator (green) x: Jog/shuttle still indicator (red) 2-1-2 Search Control Section 1 JOG/SHUTTLE button 2 JOG dial 3 SHUTTLE dial 1 JOG/SHUTTLE button Use this button to toggle between jog mode and shuttle mode when using the JOG dial or SHUTTLE dial. Press this button once for playback in jog mode, or press this button twice for playback in shuttle mode during playback or F FWD/REW. The corresponding "JOG" indicator or "SHTL" indicator lights in the display section. 2 JOG dial Turn this to carry out playback in the modes shown in the table in the right column. Turn the dial clockwise for forward playback and counterclockwise for reverse playback. 3 SHUTTLE dial Turn this to carry out playback in the modes shown in the following table. Turn the dial clockwise for forward playback and counterclockwise for reverse playback. After pressing the JOG/SHUTTLE button, turn the JOG dial for playback in jog mode and the SHUTTLE dial for playback in shuttle mode. Playback modes using the JOG/SHUTTLE dial Playback mode Operations and functions Jog Press the JOG/SHUTTLE button once to light "JOG," then turn the JOG dial, or simply turn the JOG dial without lighting "JOG." Playback is carried out at a speed corresponding to the rotating speed of the JOG dial. The playback speed range is from -1 to +1 times normal speed. The JOG dial has no detents. Shuttle Press the JOG/SHUTTLE button twice to light "SHTL," then turn the SHUTTLE dial, or simply turn the SHUTTLE dial without lighting "SHTL." Playback is carried out at a speed corresponding to the angular position of the SHUTTLE dial. The playback speed range is as follows. When using a Digital Betacam tape (J-30/30SDI): -21 to +21 times normal speed When using an MPEG IMX tape (J-30/ 30SDI): -32/-38 to +32/+38 times normal speed (NTSC/PAL) When using a Betacam SX tape: -35 to +35 times normal speed When using an analog Betacam tape: -18/-20 to +18/+20 times normal speed (NTSC/PAL) The SHUTTLE dial has detents at the center position, and at that point a still picture is displayed. Notes • Normally, you turn the SHUTTLE dial after setting the jog/shuttle mode by pressing the JOG/SHUTTLE button. However, you can also set the jog/shuttle mode simply by turning the dial. (This feature is available when SELECTION FOR JOG/SHUTTLE DIAL ENABLE, extended menu item 101 of the setup menu, is set to DIAL.) In this case, you must reset the SHUTTLE dial to the center position after turning it, otherwise the dial may be moved by vibration and the tape may start running in the shuttle mode during playback. 2-6 Chapter 2 Location and Function of Parts