Sony J30 Product Manual (J10, J10SDI, J30, and J30SDI Manual) - Page 46
Extended Menu
View all Sony J30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
7-74 -E4xteEndxetdeMnednued Menu The extended menu contains the following items. In the "Settings" column of the table, the factory default settings are indicated by an enclosing box. Item number Item name 101 SELECTION FOR JOG/ SHUTTLE DIAL ENABLE 102 MAXIMUM TAPE SPEED 104 AUDIO MUTING TIME 105 REFERENCE SYSTEM ALARM 114 AUDIO MONITOR OUTPUT LEVEL 125 AUTO REWIND 130 TIMER DISPLAY DIMMER CONTROL 137 TRACKING CONTROL VIA JOG/SHUTTLE DIAL 213 WIRELESS REMOTE CONTROL Settings Select how the unit enters the jog/shuttle mode. DIAL : Turning the JOG/SHUTTLE dial enters the jog/shuttle mode. KEY : Press the JOG/SHUTTLE button to enter jog/shuttle mode. Set the tape speed for fast-forward, rewind and jog/shuttle mode operations. MAX : Fast forward, rewind and jog/shuttle mode operations are carried out at maximum speed. MX/24: Fast forward and rewind operations are carried out at maximum speed, and jog/shuttle mode operations are carried out at up to 24 times normal speed. ×24: Fast forward, rewind and jog/shuttle mode operations are carried out at up to 24 times normal speed. Maximum speed for fast forward and rewind • Analog cassettes: 24 times normal playback speed • Digital cassettes: 50 times normal playback speed Maximum speed for jog/shuttle mode • Analog cassettes: 18 (525)/20 (625) times normal playback speed (NTSC/PAL) • Digital cassettes: Betacam SX 35 times normal playback speed MPEG IMX 32 (525)/38 (625) times normal playback speed (J-30/30SDI only) Digital Betacam 21 times normal playback speed (J-30/ 30SDI only) Select the length of time for which audio muting occurs when the unit switches to playback either from stopped or from still playback in the jog/shuttle mode. LOCK : Mute the audio output signal until the servo lock functions. OFF : Set the audio muting time to zero (i.e. no muting). 0.1S ... 1.0S: Set the audio muting time from 0.1 seconds to 1.0 second, in 0.1- second increments. Select whether or not to display a warning when the video/audio reference signal is not supplied. OFF : No warning. ON : Flash the STOP indicator as a warning. Choose whether or not to permit changes in the audio monitor output level from the control panel (which can simultaneously be monitored via the headphone jack) using the volume control knob on the control panel. FIXED : Output level changes not permitted. VAR: Output level changes permitted. Determine whether or not to rewind the tape automatically when playback reaches the end of a tape. DIS: Do not rewind automatically. ENA : Rewind automatically. Set the brightness of the time data/menu display. 0 to 3 : The brightness can be set within this range. 3 is the brightest and 0 is the darkest. Select the tracking control in the JOG/SHUTTLE dial. OFF : Disables tracking control. ON: Enables tracking control by turning the JOG/SHUTTLE dial in the PLAY mode. (When this item is set to ON, the JOG and SHTL indicators in the display section flash.) Selects control mode with the infrared Remote Commander. OFF : Do not operate. ON: Operate. Chapter 7 Setup Menu 7-10 Chapter 7 Setup Menu