Sony J30 Product Manual (J10, J10SDI, J30, and J30SDI Manual) - Page 43

7-3 Basic Menu The basic menu contains the following items. In the "Settings" column of the table, the factory default settings are indicated by an enclosing box. Item number Item name Settings 002a) CHARACTER HPOSITION Adjust the horizontal screen position of the character information output from the COMPOSITE (SUPER) output connector, SDI (SUPER) output connector (J10SDI/30SDI), or DV connector for superimposed display on the monitor. 00 ... 10 ... 08: The value 00 is for the far left of the screen and 08 for the far right. Increasing the value moves the position of the characters to the right. 003a), b) 005 CHARACTER VPOSITION DISPLAY INFORMATION SELECT Adjust the vertical screen position of the first line of the character information output from the COMPOSITE (SUPER) output connector, SDI (SUPER) output connector (J-10SDI/30SDI), or DV connector for superimposed display on the monitor. 00 ... 11 ... 14 (525 mode)/00 ... 14 ... 17 (625 mode): The hexadecimal value 00 is for the top of the screen and increasing the value lowers the position of the characters. Determines the kind of character information to be output from the COMPOSITE (SUPER) output connector, SDI (SUPER) output connector (J-10SDI/30SDI), or DV connector for superimposed display on the monitor. OFF : Displays no character information. T&STA : Time data display information and the unit's status. T&UB: Time data display information and the user bits. T&CTL: Time data display information and CTL. T&T: Time data display information and time code (LTC or VITC). TIME: Time data display information only If there is an overlap between the setting of this item and the setting of the control panel, it is automatically avoided. For example, if CTL is selected on the control panel and this menu item setting is T&CTL, CTL and LTC will be output. 007 009a) 011a) TAPE TIMER DISPLAY CHARACTER TYPE CHARACTER V-SIZE Determines whether to display the CTL counter in 12-hour mode or 24-hour mode. + -12H : 12-hour mode 24H: 24-hour mode Determines the type of characters such as time code output from the COMPOSITE (SUPER) output connector, SDI (SUPER) output connector (J-10SDI/30SDI), or DV connector for superimposed display on the monitor. WHITE : White letters on a black background. BLACK: Black letters on a white background. W/OUT: White letters with black outlines. B/OUT: Black letters with white outlines. Determines the vertical size of characters such as time code output from the COMPOSITE (SUPER) output connector, SDI (SUPER) output connector (J-10SDI/30SDI), or DV connector for superimposed display on the monitor. ×1 : Standard size ×2: 2 times standard size a) When setting items 002, 003, 009 and 011 watch the monitor screen, and adjust to the required state. b) When displaying time code values, there is a slight time delay. Therefore, when creating a tape for off-line editing, the information inserted in the upper half of the screen may be delayed by one frame. Chapter 7 Setup Menu 7-7 Chapter 7 Setup Menu