Sony J30 Product Manual (J10, J10SDI, J30, and J30SDI Manual) - Page 25
Playback
View all Sony J30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Playback 4 Chapter Chapter 4 Playback 4-1 Playback Procedures 4-1-1 Normal Playback SHIFT button Cassette compartment AU MON SEL/ DOLBY C NR button STOP button PLAY button Insert a cassette beforehand. For details of how to insert a cassette, see the section "Inserting and ejecting cassettes" on page 3-2. To start playback Press the PLAY button. To stop playback Press the STOP button. If you play back to the end of the tape The tape is automatically rewound, and stops. (When AUTO REWIND, extended menu item 125, is set to ENA) Notes • If you playback a Betacam/Betacam SP cassette immediately after playing back a Betacam SX cassette or Digital Betacam cassette, it may take several seconds for playback to start. • This unit uses an auto-tracking function (when using the Digital Betacam or MPEG IMX format). The factory setting for the auto-tracking is on (AUTO TRACKING ON). You can turn auto-tracking off. For details on how to change the setting, contact your nearest Sony dealer. While this unit is pulling the tape in, the PLAY button indicator B flashes. When using the Dolby C NR system When using an analog Betacam cassette, you can use Dolby C NR for audio playback. To activate the Dolby NR system, press the AU MON SEL/DOLBY C NR button while holding down the SHIFT button on the control panel. 4-1 Chapter 4 Playback