Sony J30 Product Manual (J10, J10SDI, J30, and J30SDI Manual) - Page 54

Specifications - differential

Page 54 highlights

Specifications Jog mode Still to ±1 times normal playback speed Servo lock time (from standby) 1.5 second or less Load/unload time 7 seconds or less Cassette types Digital Betacam cassette (J-30/ 30SDI) MPEG IMX cassette (J-30/30SDI) Betacam SX cassette Betacam SP cassette Betacam cassette UVW cassette Digital video system Digital video signal system Sampling frequency Y: 13.5 MHz R-Y/B-Y: 6.75 MHz Quantization Digital Betacam (J-30/30SDI): 10 bits/sample MPEG IMX (J-30/30SDI): 8 bits/ sample Betacam SX: 8 bits/sample Compression Coefficient recording system/ MPEG2 4:2:2 P@ML Channel coding S-I-NRZI PR-IV Error correction Reed-Solomon code Analog composite output Bandwidth Y: 0.5 to 4.0 MHz +0.5 dB/ -3.0 dB (NTSC) Y: 0.5 to 4.5 MHz +0.5 dB/ -3.0 dB (PAL) S/N 53 dB or more Differential gain 2% or less Differential phase 2° or less K factor (2T pulse) 1% or less Y/C delay 25ns or less Analog component output Bandwidth MPEG IMX/Digital Betacam format (J-30) Y: 0.5 to 5.75 MHz +0.5 dB/-5.5 dB R-Y/B-Y: 0.5 to 2.0 MHz +0.5 dB/ -4.5 dB Betacam SX format (J-10/30) Y: 0.5 to 4.5 MHz +0.5 dB/-4.5 dB (NTSC) Y: 0.5 to 5.5 MHz +0.5 dB/-4.5 dB (PAL) A-2 Appendix R-Y/B-Y: 0.5 to 2.0 MHz +0.5 dB/ -4.5 dB S/N 56 dB or more K factor (2T pulse) 1% or less Digital audio system Digital audio signal format Betacam SX, Digital Betacam (J-30/30SDI): CH-1 - CH-4 MPEG IMX (J-30/30SDI): CH-1 - CH-8 Sampling frequency 48 kHz (synchronized with video) Quantization 16 bits/ sample or 20 bits/sample Wow and flutter Below measurable level Headroom 20 dB (or 18 dB, 16 dB selectable) Emphasis T1= 50 µs, T2=15 µs Analog output A/D, D/A quantization 16 bits/sample or 20 bits/sample Frequency response 20 Hz to 20 kHz +1 dB/ -1.5 dB (0 dB, 1 kHz) Dynamic range 85 dB or more (at 1 kHz, emphasis on) Distortion 0.1% or less (at 1 kHz, emphasis on, reference level (+4 dBm)) Crosstalk -75 dB or less (at 1 kHz, between any two channels) Input/output connectors of J-10/30 Output connectors COMPOSITE (SUPER) BNC (1), Phono jack (1), including character superimposition 1.0 Vp-p, 75 Ω, Sync negative COMPONENT BNC (3), Y: 1.0 Vp-p, R-Y/B-Y: 0.7 Vp-p, 75 Ω S VIDEO Mini-Din 4 pin (1), Y: 1.0 Vp-p, C: 0.286 Vp-p burst, 75 Ω DV IEEE1394 (1), 6-pin PHONES JM-60 stereo phone jack -∞ to -12 dBu at 8 Ω load, unbalanced AUDIO MONITOR OUTPUT (L/R) Phono jack (2), unbalanced XLR 3-pin, male (2) +4 dBm at 600 Ω load, low impedance, balanced Appendix

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57

Specifications
Appendix
A-2
Appendix
Jog mode
Still to ±1 times normal playback
speed
Servo lock time (from standby)
1.5 second or less
Load/unload time
7 seconds or less
Cassette types
Digital Betacam cassette (J-30/
30SDI)
MPEG IMX cassette (J-30/30SDI)
Betacam SX cassette
Betacam SP cassette
Betacam cassette
UVW cassette
Digital video system
Digital video signal system
Sampling frequency
Y: 13.5 MHz
R–Y/B–Y: 6.75 MHz
Quantization
Digital Betacam (J-30/30SDI): 10
bits/sample
MPEG IMX (J-30/30SDI): 8 bits/
sample
Betacam SX: 8 bits/sample
Compression
Coefficient recording system/
MPEG2 4:2:2 P@ML
Channel coding
S-I-NRZI PR-IV
Error correction
Reed-Solomon code
Analog composite output
Bandwidth
Y: 0.5 to 4.0 MHz +0.5 dB/
–3.0 dB (NTSC)
Y: 0.5 to 4.5 MHz +0.5 dB/
–3.0 dB (PAL)
S/N
53 dB or more
Differential gain
2% or less
Differential phase
2° or less
K factor (2T pulse)
1% or less
Y/C delay
25ns or less
Analog component output
Bandwidth
MPEG IMX/Digital Betacam format (J-30)
Y: 0.5 to 5.75 MHz +0.5 dB/–5.5
dB
R–Y/B–Y: 0.5 to 2.0 MHz +0.5 dB/
–4.5 dB
Betacam SX format (J-10/30)
Y: 0.5 to 4.5 MHz +0.5 dB/–4.5 dB
(NTSC)
Y: 0.5 to 5.5 MHz +0.5 dB/–4.5 dB
(PAL)
R–Y/B–Y: 0.5 to 2.0 MHz +0.5 dB/
–4.5 dB
S/N
56 dB or more
K factor (2T pulse)
1% or less
Digital audio system
Digital audio signal format
Betacam SX, Digital Betacam (J-30/30SDI): CH-1 -
CH-4
MPEG IMX (J-30/30SDI): CH-1 - CH-8
Sampling frequency
48 kHz (synchronized with video)
Quantization
16 bits/ sample or 20 bits/sample
Wow and flutter
Below measurable level
Headroom
20 dB (or 18 dB, 16 dB selectable)
Emphasis
T1= 50 μs, T2=15 μs
Analog output
A/D, D/A quantization
16 bits/sample or 20 bits/sample
Frequency response
20 Hz to 20 kHz +1 dB/ –1.5 dB
(0 dB, 1 kHz)
Dynamic range
85 dB or more (at 1 kHz, emphasis
on)
Distortion
0.1% or less (at 1 kHz, emphasis
on, reference level (+4 dBm))
Crosstalk
–75 dB or less (at 1 kHz, between
any two channels)
Input/output connectors of J-10/30
Output connectors
COMPOSITE (SUPER)
BNC (1), Phono jack (1), including
character superimposition
1.0 Vp-p, 75
, Sync negative
COMPONENT
BNC (3), Y: 1.0 Vp-p, R–Y/B–Y:
0.7 Vp-p, 75
S VIDEO
Mini-Din 4 pin (1), Y: 1.0 Vp-p,
C: 0.286 Vp-p burst, 75
DV
IEEE1394 (1), 6-pin
PHONES
JM-60 stereo phone jack
to –12 dBu at 8
load,
unbalanced
AUDIO MONITOR OUTPUT (L/R)
Phono jack (2), unbalanced
XLR 3-pin, male (2)
+4 dBm at 600
load, low
impedance, balanced