Sony J30 Product Manual (J10, J10SDI, J30, and J30SDI Manual) - Page 44
Betacam SX or MPEG IMX format.
View all Sony J30 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
7-3 Basic Menu Item number Item name Settings 012 CONDITION DISPLAY ON Determines whether or not to display the channel status in addition to the VIDEO MONITOR characters being superimposed. (The channel status can disable : Disables display be displayed only when enable: Enables display the CHARACTER V-SIZE Displayed channel status is set to ×1.) The channel statuses are displayed under the timer or status display line. (When an analog tape is inserted, only the playback level of the video is displayed.) e.g. V - A - The letters that follow "V" indicate the status of the video channels of the rotation head. The letters that follow "A" indicate the status of the audio channels of the rotation head. Character patterns -: Good condition *: Acceptable condition x: Bad condition 013 525/625 SYSTEM Specify whether to enable switching between the 525 (NTSC) and 625 (PAL) systems. SELECT OFF : Do not enable system switching. ON: Enable system switching. You can choose and set 525 (NTSC) or 625 (PAL) as this unit's initial operation mode. If the unit is set as 525 (NTSC) mode beforehand, setting this item to ON and switching the system to 625 (PAL) mode enables the unit to operate in 625/50 mode. On the other hand, if the unit is set as 625 (PAL) mode beforehand, setting this item to ON and switching the system to 525 (NTSC) mode enables the unit to operate in 525/60 mode. For information on how to switch the system or other details, see "Switching between 525/625 line systems (basic menu item 013)" on page 7-4. 020 DROP-FRAME MODE Determines the drop-frame mode of the CTL counter. SELECT DF : Drop-frame mode (When operating in 525 mode) NDF: Non-drop-frame mode 022 PF2 KEY SELECT Determines the function assigned to PF2 button. REM : Displays the remaining tape time by minute. RUN : Displays the total number of times that the tape has been running until then. 024 MENU CHARACTER Selects the type of characters to superimpose on the video signal (overlaid TYPE display) output from the COMPOSITE (SUPER) output connector, SDI (SUPER) output connector (J-10SDI/30SDI), or DV connector. WHITE : White letters on a black background BLACK: Black letters on a white background W/OUT: White letters with black outlines B/OUT: Black letters with white outlines 025 NOISELESS PB MODE Select whether or not to use the noiseless playback function (when using Betacam SX or MPEG IMX format). Disable : Do not use the noiseless playback function. Enable: Use the noiseless playback function. 026 AUDIO MONITOR MODE Select a mode of AUDIO MONITOR. MONO: Monaural + mix STEREO : Stereo + mix Chapter 7 Setup Menu 7-8 Chapter 7 Setup Menu