Sony NWZ-X1061F Operation Guide - Page 159
´¸, Other
View all Sony NWZ-X1061F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
159 Troubleshooting Table of Contents Index Other Symptom The touch panel does not work properly. There is no beep sound when the player is operated. The player gets warm. The date and time have been reset. Noise is generated when plugging or unplugging the headphones. Cause/Remedy A screen protection sheet or privacy filter is not applied properly. If the sheet lies off the edge of the screen, or burrows its way into the gap, reapply it. If you are using a sheet other than Sony's optional protection sheet, it may interfere with the touch panel. The HOLD switch is set to the HOLD position. Slide the HOLD switch to the opposite position ( page 10). "Beep Settings" is set to "Off." Set "Beep Settings" to "On" ( page 119). The beep does not sound when the player is connected to the optional cradle, or another device. The player may become warm when the battery is being charged and just after charging. The player also may get warm when a large amount of data is transferred. This behavior is normal and not cause for concern. Set the player aside for a while to allow it to cool down. If you left the player for a while with the battery used up, the date and time may be reset. This is not a malfunction. Charge the battery until appears on the screen ( page 24), and set the date and time again ( page 26). Take off the headphones when plugging or unplugging the headphones. If you plug or unplug the headphones during playing song or using Noise Canceling function, you may hear a noise from the headphones. This is not a malfunction.