Sony SRG360SHE Product Manual Operation Manual SRG-360SHE - Page 18
attach it using the 3 screws M 3, While pushing up on the front part of the camera
View all Sony SRG360SHE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
3 Attach the ceiling bracket (A) to the bottom of the camera using the 4 screws (M 3 × 8) supplied. Align the bracket holes with the screw holes on the camera, and attach the bracket to the camera. Ceiling Attach the wire rope. M 3 × 8 (supplied) 1 3 2 4 Ceiling bracket (A) 4 Insert the protrusions raised on the ceiling bracket (A) into the spaces prepared in the ceiling bracket (B), and temporarily attach them by pushing the ceiling bracket (A) to the rear. Ceiling bracket (B) Ceiling Ceiling bracket (A) 5 While pushing up on the front part of the camera, attach it using the 3 screws (M 3 × 8) supplied, starting with the screw at position 1. Ceiling Tighten the screws a bit at a time in the numbered order shown in the illustration. After all of the screws are inserted and temporarily tightened properly, securely tighten each one in turn. Note For assembly, use only the screws supplied with the unit. Using other screws may damage the unit. 1 M 3 × 8 (supplied) Lightly tighten screws temporarily in the order indicated in the figure. Afterwards, screw each of them firmly. 6-1 Connect the cables to the connectors on the rear of the camera. Ceiling 18