Sony SRG360SHE Product Manual Operation Manual SRG-360SHE - Page 32

Presetting Feature Up to 6 combinations of settings (6 positions) including camera position, zooming, focusing, and backlighting, can be preset. For details of the camera settings to be preset, see "Initial value and preset" (page 71). Notes • When the power is turned on, the camera starts with the settings stored in POSITION 1. • If you want to retain the previous pan and tilt positions, etc. before the power is turned off and turned on again, store those positions in POSITION 1. • When you are storing or cancelling the settings in one POSITION, you cannot call up, store or cancel the settings in another POSITION. • You can register, call, or delete the preset even while the menu is being displayed. However, you cannot change the position with the pan/tilt operation. • If you turn the PAN/TILT LIMIT from OFF to ON, the stored positions will be cleared. Perform PAN/TILT LIMIT first, then preset. • Please note that if you flip the image, the set position will be cleared. 1 Press the PAN-TILT RESET button to reset the pan/ tilt position. 2 Adjust the position, zooming, focusing and backlighting of the camera (pages 30 and 31). 3 While holding down the PRESET button, press any of the POSITION buttons, 1 to 6, in which you want to store the settings. Press a POSITION button. While holding down this button Recalling the stored settings Press any of the POSITION buttons, 1 to 6, in which you have stored the settings. Cancelling the preset memory While holding down the RESET button, press the POSITION button from which you want to cancel the settings. Press a POSITION button. While holding down this button 32