Sony SRG360SHE Product Manual Operation Manual SRG-360SHE - Page 55

WDR (VIEW-DR) In high-contrast scenes such as against a back light, this function reduces overexposure and underexposure. This function is enabled if the setting values other than Off are selected from the list box. This function is enabled only when Mode is set to Full auto. Notes • When the function is enabled, a change in screen luminance occurs for a moment. • When the change of exposure is great, the screen may stop for a moment. Auto slow shutter The automatic slow shutter function is enabled when the check box is checked. This function can be selected only when Mode is set to Full auto. Backlight compensation Select the checkbox to enable the backlight compensation function. This function is enabled only when Mode is set to Full auto. Exposure compensation Select the exposure correction value from the list box to adjust the target brightness for the automatic exposure setting. Select high values to make the image brighter, lower values to make the image darker. This function can be selected only when Mode is set to Full auto, Shutter priority, Iris priority. Gain limit Select the maximum gain value of automatic exposure control from the list box. This function can be selected only when Mode is set to Full auto, Shutter priority, Iris priority. Note The value shown in the auto gain maximum rate is a standard value, and may differ from the actual one. Shutter speed Select the shutter speed from the list box. This function can be selected only when Mode is set to Shutter priority, Manual. Note When you change the current shutter speed setting value to a value that differs greatly, it may take some time to reflect the setting value. During that time, the setting value on the display does not match with the actual setting value. By reloading the browser, the correct setting value is displayed. Iris Select the amount of iris (F value) from the list box. This function can be selected only when Mode is set to Iris priority, Manual. Note When you change the current F value to a value that differs greatly, it may take some time to reflect the setting value. During that time, the setting value on the display does not match with the actual setting value. By reloading the browser, the correct setting value is displayed. Gain Select the gain from the list box. This function can be selected only when Mode is set to Manual. Level Select the bright level from the list box. This function can be selected only when Mode is set to Bright. High sensitivity mode Select On/Off of the high sensitivity mode from the list box. When set to On, the high-sensitivity gain is amplified according to the increase of general gain value. This function can be selected in all modes. Note When set to On, the image is noisier than when set to Off. White balance You can also set from the remote controller. See "WHITE BALANCE Menu" on page 42. Mode Select the White balance mode. Auto: Automatically adjusts the color to be closest to the image you are viewing (approximately 2500 K to 6000 K). ATW: Eliminating the influences caused by environmental illumination or lights, adjust the white balance automatically to reproduce original colors of the objects (approximately 2000 K to 10000 K). Indoor: Sets a white balance suitable for indoor photography. Outdoor: Sets a white balance suitable for outdoor photography. One push WB: The One push trigger button becomes active. Click On to adjust the white balance instantly. Shoot and zoom with a large white subject in the center of the screen before adjustment. Manual: When this option is selected, R gain and B gain become active. Selectable gain values are from 0 to 255. 55