Sony SRG360SHE Product Manual Operation Manual SRG-360SHE - Page 60

Secondary DNS server Displays the current secondary DNS server. IPv6 address 1, 2 Displays the current IPv6 address. IPv6 default gateway Displays the current IPv6 default gateway. IPv4 setting Configure the IPv4 network setting. To obtain the IP address automatically from a DHCP server Select Obtain an IP address automatically (DHCP). The IP address, subnet mask, default gateway are assigned automatically. Note When you select Obtain an IP address automatically (DHCP), make sure that a DHCP server is operating on the network. Host name Type the host name of the camera to be transmitted to the DHCP server. This setting is valid only when Obtain an IP address automatically (DHCP) is selected. Domain suffix Type the domain suffix of the camera to be transmitted to the DHCP server. This setting is valid only when Obtain an IP address automatically (DHCP) is selected. Note The domain suffix is sent to the DHCP server as FQDN (Fully Qualified Domain Name) information when Host name is set. To specify the IP address manually Deselect Obtain an IP address automatically (DHCP). Type the address in the IP address, Subnet mask and Default gateway boxes. Host name and Domain suffix are not available. IP address Type the IP address of the camera. Subnet mask Type the subnet mask value. Default gateway Type the default gateway. IPv6 setting Configure the IPv6 network setting. To obtain the IPv6 address automatically Select Obtain IP address automatically. The IP address, prefix length, default gateway are assigned automatically. Note If you select Obtain IP address automatically, ask the network administrator whether an IPv6 address can be assigned. This function is not available in a multi-prefix environment. The transmission may not work properly. To specify the IPv6 address manually Deselect Obtain IP address automatically. Type the address in the IP address, Prefix length and Default gateway boxes. IP address Type the IP address of the camera. Prefix length Type the prefix length value. Default gateway Type the default gateway. Common setting Configure the common setting for IPv4 and IPv6 network. HTTP port number Type the HTTP port number. Normally select 80. MTU Type the MTU value for the Ethernet port. To obtain DNS server address automatically Select Obtain DNS server address automatically. The Primary DNS server and Secondary DNS server are assigned automatically. Note To obtain a DNS server address automatically, first enable Obtain an IP address automatically (DHCP) in the IPv4 setting, or Obtain IP address automatically in the IPv6 setting. Ask the network administrator whether a DNS server address can be obtained automatically. To specify the DNS server address manually Deselect Obtain DNS server address automatically. Type the address in the Primary DNS server and Secondary DNS server boxes. Primary DNS server Type the IP address of the primary DNS server. Secondary DNS server Type the IP address of the secondary DNS server, if necessary. 60