Sony SRG360SHE Product Manual Operation Manual SRG-360SHE - Page 33

PTZ TRACE Feature You can record and playback up to eight different operations of pan, tilt, and zoom to the maximum length of 180 seconds using the infrared remote control. Notes • Other operations are not available during recording or playing back. • Since Positions 1 through 6 of the infrared remote control are used for playback, be sure that they do not overlap with preset functions. • Since the IR remote commander has only POSITION 1 through 6 buttons, 7 and 8 cannot be played back. • If you turn the PAN/TILT LIMIT from OFF to ON, the stored operation will be cleared. Perform PAN/TILT LIMIT first, then preset. • Please note that if you flip the image, the stored operation will be cleared. Recording pan/tilt/zoom operations 1 Press the DATA SCREEN button on the infrared remote control to display the main menu. Using the arrow buttons, move the cursor to select PTZ TRACE. Press the HOME button to open the PTZ TRACE menu. 2 On the TRACE NO setting items in the PTZ TRACE menu, use the arrow buttons to select the number you want to register. This TRACE NO value will be the POSITION NO of the infrared remote control during playback. 3 On the ACTION setting items, use the right or left arrow buttons to select START POSITION SET. Pressing the HOME button allows you to pan/tilt/ zoom with the arrow and ZOOM buttons. Press the HOME button again when the camera moves to the initial position to start recording. The initial position settings will be completed. 4 On the ACTION setting items, use the arrow buttons to select RECORD/STOP. The recording starts when you press the HOME button (the MENU screen does not get turned off). 5 When operation recording starts, the REMAIN (SEC) countdown will start. The recording will finish when the count reaches 0 or when the HOME button is pressed again. 6 You can review your recorded operation when you press the HOME button after selecting PREVIEW using the arrow buttons on the ACTION menu. Playing back pan/tilt/zoom operations 1 When the menu is not displayed, press the POSITION NO button of the same number as the TRACE NO you want to playback once. Move to the playback start position. 2 When you press the same button again, the stored playback of pan/tilt/zoom operation starts. 3 Press the HOME button during the recording playback to end the playback immediately. 4 If you operate pan/tilt/zoom during playback, the playback ends immediately and then it follows the pan/tilt/zoom operation via the remote control. Note There is no pause feature. Deleting pan/tilt/zoom operations 1 Press the DATA SCREEN button on the infrared remote control to display the main menu. Using the arrow buttons, move the cursor to select PTZ TRACE. 2 On the TRACE NO menu, use the right and left arrow buttons to select the number you want to delete. 3 On the ACTION menu, use the right and left arrow buttons to select DELETE. The recording is deleted when you press the HOME button. 33