Sony SRG360SHE Product Manual Operation Manual SRG-360SHE - Page 71

Initial value and preset • The initial values are the factory settings. • When the power is turned on, this unit starts operation with the settings stored in preset 1. • In "Preset 1 to 256", the items that are preserved even after the power from the camera is turned off are indicated by a circle (a), and the items that are not preserved are indicated by a cross (×). Mode/Position setting Pan/Tilt Position Pan/Tilt Limit Position Zoom Position D-Zoom On/Off Focus Position Focus Auto/Manual Near Limit settings AF Sensitivity AF Mode AF Run Time AF Interval WB Mode WB Data (Rgain, Bgain) One Push WB Data AE Mode WD Mode Auto Slow Shutter Mode Shutter Position Iris Position Gain Position Bright Position Exposure Compensation On/Off Exposure Compensation Amount BackLight On/Off Aperture Level High Resolution Mode On/Off Picture Effect ICR On/Off Auto ICR On/Off Auto ICR Threshold Level Image Stabilizer On/Off/Hold High Sensitivity Mode On/Off Gamma Defog On/Off NR level Gain Limit Low-Illumination Chroma Suppress Color Gain Color Hue Initial settings Home position Maximum range of movement Wide end On - Auto D000h (30 cm) Normal Normal 5 sec 5 sec Auto - - Full Auto Off Off - - - - Off ±0 Off 0Ah Off Off Off Off 0Eh Off Off 0:standard Off 3 - 2h (Middle) 4h (100%) 7h (0 degree) Preset 1 a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a Presets 2 to 256 a × a a a a a a × a a a a a a a a a a a × × a a Notes • When turning the power off and on again, if you want to reflect the camera conditions and pan/tilt position that are set before the power is turned off, store the settings in POSITION1. • The setting or deleting of memory to/from preset 1 takes approx. 2 seconds longer than other channels. • When ImageFlip is executed, all presets are reset to the initial value. • CAM_Memory command is effective only for PRESET 1 through 16. 71