Home » Sony Manuals » Video Cameras » Sony SRG360SHE » Manual Viewer

Sony SRG360SHE Product Manual Operation Manual SRG-360SHE - Page 38

To recall the stored settings, To cancel the preset memory

Add to My Manuals
Save this manual to your list of manuals

Page 38 highlights

While holding down (for POSITION 1 to 8) RESET PRESET SHIFT Press a POSITION button you want to set. 12345678 9 10 11 12 13 14 15 16 While holding down (for POSITION 9 to 16) The settings are stored in the memory of the camera. The pressed button flashes during storing. Flashing stops when storing is completed. To recall the stored settings Press any of the GROUP/POSITION buttons in which you have stored the settings. For POSITION 9 to 16, hold down the SHIFT button and press any of the GROUP/POSITION buttons. To cancel the preset memory While holding down the RESET button (for POSITION 1 to 8) or the RESET button and the SHIFT button (for POSITION 9 to 16), press the GROUP/POSITION button from which you want to cancel the settings. While holding down (for POSITION 1 to 8) Press a POSITION button RESET you want to cancel. PRESET SHIFT 12345678 9 10 11 12 13 14 15 16 While holding down (for POSITION 9 to 16) The pressed button flashes during canceling of the settings. Flashing stops when the settings have been canceled. Notes • When the power is turned on, the camera starts with the settings stored in POSITION 1. • If you want to retain the previous pan and tilt positions when the power is turned off and turned on again, store those positions in POSITION 1. • When you are storing or canceling the settings in one POSITION, you cannot call up, store or cancel the settings in another POSITION. • When you store the position, zooming, and focusing, etc. of the camera, make sure to install and secure the camera on the place to be used properly. If you change the installations of the camera after storing the settings, the differences may occur in the settings. • You can also set and store the camera settings in POSITION 1 to 16 with operation via a network. Also, the stored settings can be canceled with the operation via a network. • For the setting items can be stored and canceled, see "Initial value and preset" on page 71. • When you toggle the pan/tilt limit OFF to ON, the remembered position will be cleared. Perform the pan/tilt limit, then preset. • Please note that if you flip the image, the set position will be cleared. 38

Section	Page
Table of Contents	2
Overview	5
Features	5
How to Use This Operating Instructions	6
Camera and Supplied Accessories	6
Location and Functions of Parts and Controls	8
Camera	8
Infrared Remote Commander	10
System Configuration	12
Operating the Camera Via a Network	12
Operating a Camera Using the Remote Controller	13
Operating Multiple Cameras Using Multiple Remote Controllers	14
Precautions for Preventing Access to the Camera by an Unintended Third Party	15
Installation and Connection	16
Installing the Camera	16
Installing the Camera on a Desk	16
Attaching the Camera to a Tripod	16
Installing the Camera Using the M3 Fixing Screw Holes	16
Installing the unit on the ceiling	16
Connections	19
Connecting the power supply	19
Connecting to the PoE+ (Power over Ethernet plus) power supply system	20
RS-422 connection with IP remote controller RM-IP10	20
LAN connection with IP remote controller RM-IP10	21
Connecting a Video Monitor, etc., Equipped with HDMI Input Connector	21
Connecting with monitors with SDI input connectors	22
Connection with commercially- available microphones etc.	22
Adjusting and Setting with Menus	23
About On-Screen Menus	23
Main Menu	23
Setting Menus	23
Control Button Display Section	23
EXPOSURE Menu	24
WHITE BALANCE Menu	25
PICTURE Menu	26
PAN TILT ZOOM Menu	27
SYSTEM Menu	28
STATUS Menu	28
Operation Using the Supplied Infrared Remote Commander	29
Before Operating	29
Turning on the Power	29
Pan/Tilt and Zoom Operation	30
Panning and Tilting	30
Zooming	31
Operating Multiple Cameras with the Infrared Remote Commander	31
Adjusting the Camera	31
Focusing on a Subject	31
Shooting with Back Lighting	31
Presetting Feature	32
PTZ TRACE Feature	33
Recording pan/tilt/zoom operations	33
Playing back pan/tilt/zoom operations	33
Deleting pan/tilt/zoom operations	33
Operation Using the Remote Controller	34
Preparation	34
Operating a Camera Using the Remote Controller	35
Operating Multiple Cameras Using Multiple Remote Controllers	35
Pan/Tilt and Zoom Operation	35
Panning and Tilting	35
Zooming	36
Adjusting the Camera	36
Focusing on a Subject	36
Shooting with Back Lighting	37
Adjusting the White Balance	37
Presetting Feature	37
Storing Camera Settings	37
PTZ TRACE Feature	39
Recording pan/tilt/zoom operations	39
Playing back pan/tilt/zoom operations	39
Deleting pan/tilt/zoom operations	39
Setting with the Remote Controller	40
About On-Screen Menus	40
Operating with the Remote Controller	40
Main Menu	40
Setting Menu	40
Control Button Display Section	41
EXPOSURE Menu	41
WHITE BALANCE Menu	42
PICTURE Menu	43
PAN TILT ZOOM Menu	44
SYSTEM Menu	45
STATUS Menu	45
Operating the Camera Via a Network	46
Accessing the Camera Using the Web Browser	46
About Viewers	46
Operating the Camera	47
Main menu	47
Monitor screen	47
Operation panels	48
Pan/Tilt and Zoom Operation	49
Controlling via the control panel	49
Controlling via the preset position panel	50
Controlling using the monitor screen	50
Setting the Camera Via a Network	51
Basic Operations of the Administrator Menu	51
How to set up the Administrator menu	51
Configuration of the Administrator menu	51
System Menu	52
Information Tab	52
Installation Tab	52
Initialize Tab	53
System log Tab	54
Access log Tab	54
Video Menu	54
Picture Tab	54
Video codec Tab	56
Superimpose Tab	57
Day/Night ICR Tab	57
Audio Menu	58
Audio Tab	58
Network Menu	59
Network Tab	59
Security Menu	61
Administrator and User	61
User Tab	61
Access limit Tab	62
Referer check Tab	62
PTZF control Menu	63
PTZF control Tab	63
Preset position Tab	64
Streaming Menu	65
Streaming Tab	65
Appendix	67
Message List	67
Troubleshooting	68
Menu Configuration	69
Initial value and preset	71
Specifications	72

Match case Limit results 1 per page

The settings are stored in the memory of the camera.

The pressed button flashes during storing. Flashing

stops when storing is completed.

To recall the stored settings

Press any of the GROUP/POSITION buttons in which

you have stored the settings.

For POSITION 9 to 16, hold down the SHIFT button and

press any of the GROUP/POSITION buttons.

To cancel the preset memory

While holding down the RESET button (for POSITION 1

to 8) or the RESET button and the SHIFT button (for

POSITION 9 to 16), press the GROUP/POSITION button

from which you want to cancel the settings.

The pressed button flashes during canceling of the

settings. Flashing stops when the settings have been

canceled.

•

When the power is turned on, the camera starts with the

settings stored in POSITION 1.

•

If you want to retain the previous pan and tilt positions

when the power is turned off and turned on again, store

those positions in POSITION 1.

•

When you are storing or canceling the settings in one

POSITION, you cannot call up, store or cancel the

settings in another POSITION.

•

When you store the position, zooming, and focusing,

etc. of the camera, make sure to install and secure the

camera on the place to be used properly. If you change

the installations of the camera after storing the settings,

the differences may occur in the settings.

•

You can also set and store the camera settings in

POSITION 1 to 16 with operation via a network. Also,

the stored settings can be canceled with the operation

via a network.

•

For the setting items can be stored and canceled, see

“Initial value and preset” on page 71.

•

When you toggle the pan/tilt limit OFF to ON, the

remembered position will be cleared.

Perform the pan/tilt limit, then preset.

•

Please note that if you flip the image, the set position

will be cleared.

Notes

RESET

PRESET

SHIFT

While holding down (for POSITION 1 to 8)

Press a POSITION button

you want to set.

While holding down (for POSITION 9 to 16)