Home » Sony Manuals » Video Cameras » Sony SRG360SHE » Manual Viewer

Sony SRG360SHE Product Manual Operation Manual SRG-360SHE - Page 43

You can select ON/OFF of HIGH RESOLUTION high, APERTURE aperture compensation

Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

PICTURE Menu The PICTURE menu is used to set the items related to the picture. You can also set via a Web browser. See "Picture" on page 56 or "Installation Tab" on page 52. • Depending on the installation conditions, the image stabilizer may not be effective. • When the image stabilizer function is enabled, the subject appears closer. • The image stabilizer may not be effective under environments with high frequency vibration. To use the camera in such environments, set the image stabilizer function to OFF. APERTURE (aperture compensation) Select the aperture compensation level from among MIN, 1 to 14 and MAX. HIGH RESOLUTION (high resolution mode) You can select ON/OFF of HIGH RESOLUTION (high resolution mode). When set to ON, you can enjoy emphasized edge and high-resolution images. Note When set to ON, the image is noisier than when set to OFF. NOISE REDUCTION (noise reduction) You can enjoy clearer images by removing unnecessary noise (fixed pattern and randomized noise). You can select 6 levels from OFF (MIN) to 5 (MAX). IMAGE STABILIZER (image stabilizer) You can select the effect of image stabilizer according to the shooting conditions. OFF: The image stabilization feature becomes disabled. ON: The image stabilization feature becomes enabled. HOLD: The image stabilization feature is turned off temporarily while maintaining the angle of view for the image stabilization feature. If you set the image stabilizer to ON, you can obtain steadier images if vibration is present. This stabilizer is effective for vibration frequencies around 10 Hz. This function utilizes digital zoom. Therefore, the angle of view and resolution of images may be affected. However, image sensitivity is retained. Notes • The image stabilizer function is not effective during pan/tilt operations. It may take some time for the image to stabilize after stopping pan/tilt operations. • If the image stabilizer function is enabled, it may take some time for the image to stabilize after turning on the power of the camera. 43

Section	Page
Table of Contents	2
Overview	5
Features	5
How to Use This Operating Instructions	6
Camera and Supplied Accessories	6
Location and Functions of Parts and Controls	8
Camera	8
Infrared Remote Commander	10
System Configuration	12
Operating the Camera Via a Network	12
Operating a Camera Using the Remote Controller	13
Operating Multiple Cameras Using Multiple Remote Controllers	14
Precautions for Preventing Access to the Camera by an Unintended Third Party	15
Installation and Connection	16
Installing the Camera	16
Installing the Camera on a Desk	16
Attaching the Camera to a Tripod	16
Installing the Camera Using the M3 Fixing Screw Holes	16
Installing the unit on the ceiling	16
Connections	19
Connecting the power supply	19
Connecting to the PoE+ (Power over Ethernet plus) power supply system	20
RS-422 connection with IP remote controller RM-IP10	20
LAN connection with IP remote controller RM-IP10	21
Connecting a Video Monitor, etc., Equipped with HDMI Input Connector	21
Connecting with monitors with SDI input connectors	22
Connection with commercially- available microphones etc.	22
Adjusting and Setting with Menus	23
About On-Screen Menus	23
Main Menu	23
Setting Menus	23
Control Button Display Section	23
EXPOSURE Menu	24
WHITE BALANCE Menu	25
PICTURE Menu	26
PAN TILT ZOOM Menu	27
SYSTEM Menu	28
STATUS Menu	28
Operation Using the Supplied Infrared Remote Commander	29
Before Operating	29
Turning on the Power	29
Pan/Tilt and Zoom Operation	30
Panning and Tilting	30
Zooming	31
Operating Multiple Cameras with the Infrared Remote Commander	31
Adjusting the Camera	31
Focusing on a Subject	31
Shooting with Back Lighting	31
Presetting Feature	32
PTZ TRACE Feature	33
Recording pan/tilt/zoom operations	33
Playing back pan/tilt/zoom operations	33
Deleting pan/tilt/zoom operations	33
Operation Using the Remote Controller	34
Preparation	34
Operating a Camera Using the Remote Controller	35
Operating Multiple Cameras Using Multiple Remote Controllers	35
Pan/Tilt and Zoom Operation	35
Panning and Tilting	35
Zooming	36
Adjusting the Camera	36
Focusing on a Subject	36
Shooting with Back Lighting	37
Adjusting the White Balance	37
Presetting Feature	37
Storing Camera Settings	37
PTZ TRACE Feature	39
Recording pan/tilt/zoom operations	39
Playing back pan/tilt/zoom operations	39
Deleting pan/tilt/zoom operations	39
Setting with the Remote Controller	40
About On-Screen Menus	40
Operating with the Remote Controller	40
Main Menu	40
Setting Menu	40
Control Button Display Section	41
EXPOSURE Menu	41
WHITE BALANCE Menu	42
PICTURE Menu	43
PAN TILT ZOOM Menu	44
SYSTEM Menu	45
STATUS Menu	45
Operating the Camera Via a Network	46
Accessing the Camera Using the Web Browser	46
About Viewers	46
Operating the Camera	47
Main menu	47
Monitor screen	47
Operation panels	48
Pan/Tilt and Zoom Operation	49
Controlling via the control panel	49
Controlling via the preset position panel	50
Controlling using the monitor screen	50
Setting the Camera Via a Network	51
Basic Operations of the Administrator Menu	51
How to set up the Administrator menu	51
Configuration of the Administrator menu	51
System Menu	52
Information Tab	52
Installation Tab	52
Initialize Tab	53
System log Tab	54
Access log Tab	54
Video Menu	54
Picture Tab	54
Video codec Tab	56
Superimpose Tab	57
Day/Night ICR Tab	57
Audio Menu	58
Audio Tab	58
Network Menu	59
Network Tab	59
Security Menu	61
Administrator and User	61
User Tab	61
Access limit Tab	62
Referer check Tab	62
PTZF control Menu	63
PTZF control Tab	63
Preset position Tab	64
Streaming Menu	65
Streaming Tab	65
Appendix	67
Message List	67
Troubleshooting	68
Menu Configuration	69
Initial value and preset	71
Specifications	72

Match case Limit results 1 per page

PICTURE Menu

The PICTURE menu is used to set the items related to the

picture.

You can also set via a Web browser.

See “Picture” on page 56 or “Installation Tab” on

page 52.

APERTURE (aperture compensation)

Select the aperture compensation level from among MIN,

1 to 14 and MAX.

HIGH RESOLUTION (high resolution mode)

You can select ON/OFF of HIGH RESOLUTION (high

resolution mode). When set to ON, you can enjoy

emphasized edge and high-resolution images.

When set to ON, the image is noisier than when set to

OFF.

NOISE REDUCTION (noise reduction)

You can enjoy clearer images by removing unnecessary

noise (fixed pattern and randomized noise). You can

select 6 levels from OFF (MIN) to 5 (MAX).

IMAGE STABILIZER (image stabilizer)

You can select the effect of image stabilizer according to

the shooting conditions.

OFF:

The image stabilization feature becomes disabled.

ON:

The image stabilization feature becomes enabled.

HOLD:

The image stabilization feature is turned off

temporarily while maintaining the angle of view for the

image stabilization feature.

If you set the image stabilizer to ON, you can obtain

steadier images if vibration is present. This stabilizer is

effective for vibration frequencies around 10 Hz. This

function utilizes digital zoom. Therefore, the angle of

view and resolution of images may be affected. However,

image sensitivity is retained.

•

The image stabilizer function is not effective during

pan/tilt operations. It may take some time for the image

to stabilize after stopping pan/tilt operations.

•

If the image stabilizer function is enabled, it may take

some time for the image to stabilize after turning on the

power of the camera.

•

Depending on the installation conditions, the image

stabilizer may not be effective.

•

When the image stabilizer function is enabled, the

subject appears closer.

•

The image stabilizer may not be effective under

environments with high frequency vibration. To use the

camera in such environments, set the image stabilizer

function to OFF.

Note

Notes