Sony SRG360SHE Product Manual Operation Manual SRG-360SHE - Page 66
Multicast streaming, RTSP setting, Enable, RTSP multicast address, RTSP multicast video port number 1
View all Sony SRG360SHE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
port number will be used for every transmission, based on the port number specified here. Multicast streaming Set whether the camera uses multicast streaming for H.264 video data and audio data or not. It reduces the transmission load on the camera by having a computer of the same segment network receive the same transmitting data. Enable Select the checkbox to allow multicast sending. When you select the checkbox, set Multicast address, Video port number and Audio port number properly. Note Specify different numbers for the video port number and the audio port number. RTSP multicast address Set the multicast address used on RTSP multicast streaming. RTSP multicast video port number 1, 2, 3 Specify the H.264 video transmission port number used for RTSP multicast streaming. The default setting is 61000, 63000 or 65000. Specify an even number from 1024 to 65534. Two port numbers (the number specified here and an odd number with 1 added to the specified number) are actually used for video data communication and control. The settings for Image 1, Image 2 and Image 3 apply to Video port number 1, 2 and 3 respectively. RTSP multicast audio port number Specify the audio transmission port number used for RTSP multicast streaming. The default setting is 59000. Specify an even number from 1024 to 65534. Two port numbers (the number specified here and an odd number with 1 added to the specified number) are actually used for audio data communication and control. RTSP setting Set the RTSP setting which cannot be set in the Unicast streaming setting and Multicast streaming. RTSP port number Set the port number used for RTSP streaming. The default setting is 554. If you change the setting, the RTSP server will be rebooted. RTSP time out Specify the time out of the Keep-Alive command by RTSP streaming. You can set the time out from 0 second to 600 seconds. At the 0 setting, time out of the Keep-Alive command is not available. 66