Sony STR-DN1030 Operating Instructions (Large File - 11.51 MB) - Page 82
To cancel pairing operation, Pairing the receiver with a, device - bluetooth
View all Sony STR-DN1030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Pairing the receiver with a Bluetooth device Pairing is an operation where Bluetooth devices register with each other beforehand. Use the procedure below to pair the receiver with your Bluetooth device. Once a pairing operation is performed, it does not need to be performed again. If pairing is already completed, proceed to "Playing music of a Bluetooth device" (page 83). BLUETOOTH 1 Place the Bluetooth device within 1 meter (3.3 feet) from this receiver. 2 Press BLUETOOTH to select Bluetooth function. 3 Hold down BLUETOOTH for 2 seconds to activate the pairing mode of the receiver. "Pairing ready" appears on the TV screen and "BLUETOOTH" flashes quickly on the display panel. Perform step 4 within 5 minutes, otherwise pairing will be canceled. In this case, repeat this step. 4 Perform pairing on the Bluetooth device to detect this receiver. For details, refer to the operating instructions of your Bluetooth device. A list of detected devices may appears on the Bluetooth device display depending on the type of Bluetooth device. This receiver is displayed as "STR-DN1030". Note When establishing a connection with this receiver, select the audio profile (A2DP, AVRCP) at the Bluetooth device. If the Bluetooth device does not support the AVRCP profile, you cannot perform playback or other operations with this receiver (page 81). 5 Select "STR-DN1030" on the Bluetooth device display. If "STR-DN1030" is not displayed, repeat from step 1. 6 If passkey* is required on the display of the Bluetooth device, enter "0000". 7 Once pairing is completed, connect this receiver with the Bluetooth device. Depending on the device, connection is automatically made along with the pairing. Once the connection is established, the device name appears on the TV screen and "BLUETOOTH" lights up on the display panel. * Passkey may be called "Passcode", "PIN code", "PIN number" or "Password". Notes • If pairing is not successful, "Cancel" appears on the TV screen. Repeat steps 1 to 6. • The receiver only supports numerical passkey up to 4 digits. • You can pair up to 9 Bluetooth devices with this receiver. If 10th Bluetooth device is paired, the least recently connected device will be replaced by the new one. • To pair with other Bluetooth devices, repeats steps 1 to 6. • To delete all pairing information, see "Clear History" (page 101). To cancel pairing operation Hold down BLUETOOTH after step 3. "Cancel" appears on the TV screen. 82US