Sony STR-DN1030 Operating Instructions (Large File - 11.51 MB) - Page 98
HDMI Settings menu, Network Settings menu
View all Sony STR-DN1030 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 98 highlights
HDMI Settings menu You can adjust the required settings for equipment connected to the HDMI jack. x Ctrl for HDMI (Control for HDMI) Lets you turn the Control for HDMI function on or off. For details, see "Preparing for the "BRAVIA" Sync" (page 84). • ON • OFF Notes • When you set "Ctrl for HDMI" to "ON", "Audio Out" may be changed automatically. • When the receiver is in standby mode, the ON/STANDBY indicator on the front panel lights up in amber if "Ctrl for HDMI" is set to "ON". x Pass Through Lets you output the HDMI signals to the TV even when the receiver is in standby mode. • ON: When the receiver is in the standby mode, the receiver continuously outputs HDMI signals from the receiver's HDMI TV OUT jack. • AUTO: When the TV is turned on while the receiver is in the standby mode, the receiver outputs HDMI signals from the receiver's HDMI TV OUT jack. Sony recommends this setting if you use a "BRAVIA" Sync compatible Sony TV. This setting saves power in the standby mode when compared with the "ON" setting. • OFF: The receiver does not output HDMI signals when in standby mode. Turn on the receiver to enjoy the connected equipment's source on the TV. This setting saves power in the standby mode when compared with the "ON" setting. Notes • This function is not available when "Ctrl for HDMI" is set to "OFF". • When "AUTO" is selected, it may take a little more time for the image and sound to be output to the TV than when "ON" is selected. x Audio Out Lets you set the HDMI audio signals output from the playback equipment connected to the receiver via an HDMI connection. • AMP: The HDMI audio signals from the playback equipment are only output to the speakers connected to the receiver. Multi channel sound can be played back as it is. Note Audio signals are not output from the TV's speaker when "Audio Out" is set to "AMP". • TV+AMP: The sound is output from TV's speaker and the speakers connected to the receiver. Notes • The sound quality of the playback equipment depends on the TV's sound quality, such as the number of channels, and the sampling frequency, etc. If the TV has stereo speakers, the sound output from the receiver is also in stereo as that of the TV, even if you play back multi channel source. • When you connect the receiver to a video equipment (projector, etc.), sound may not be output from the receiver. In this case, select "AMP". Network Settings menu You can adjust the settings for the network. The Network Settings menu is available only when the Home Network or SEN function is selected. x Settings Lets you make the network settings. For details, see "Configuring the network settings of the receiver" (page 44). • Wireless LAN Settings • Wired LAN Settings x Information Lets you check the network information for the network. 98US