Sony WF-1000XM5 Help Guide - Page 138
Cleaning the holes of the charging case, Drying the headset, Cleaning the noise isolation earbud
View all Sony WF-1000XM5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
Cleaning the holes of the charging case Clean the holes where the earbud tips fit with a cotton swab, etc. E: Holes of the charging case (left, right) Drying the headset After cleaning is complete, leave the headset to dry thoroughly in room temperature. Note When drying the headset, if the IR sensors touch the table, the headset will be considered worn and the rechargeable battery may continue to be consumed. Place the headset units with the IR sensors facing sideways or upwards. Cleaning the noise isolation earbud tips When the noise isolation earbud tips become dirty, wipe off the dirt with a dry cloth, etc. If foreign material such as earwax becomes attached to the mesh part of the earbud tip, the sound may become muffled or difficult to hear. Remove the earbud tip from the headset, apply a cotton swab lightly to the mesh part, and rotate the cotton swab slowly to wipe off the dirt. Be careful not to tear the mesh part. Note Earbud tips are consumables. When the earbud tips get soaked, drain the liquid well, and make sure that the earbud tips are dried before use or storage. Avoid washing with water, wet wipes, and the use of organic solvents such as alcohol, as these can cause premature deterioration. 138